HuntingNet.com Forums - 5 DEGREES OFF SET?

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - 5 DEGREES OFF SET? (https://www.huntingnet.com/forum/technical/175776-5-degrees-off-set.html)

bigfella

01-17-2007 10:35 AM

5 DEGREES OFF SET?

HOW TO SET JIG FOR OFFSETTING BLAZERS

killzonearchery

01-17-2007 10:36 AM

RE: 5 DEGREES OFF SET?

I would only put them on normal.

The Rev

01-17-2007 10:38 AM

RE: 5 DEGREES OFF SET?

Depends on the type of jig you have. Some come withan offset others come with a helical.

mez	01-17-2007 10:47 AM

RE: 5 DEGREES OFF SET?

You can't set it for exactly 5 degrees, on a Bitzenburger anyway. You are limited by vane to shaft contact. On the Bitz you adjust the knobs until you have offset and the entrire vane contacts the shaft.

Only way to measure it would be to draw lines on the shaft and use a protractor I think? You could then vary the position as the jig allows.

Does that make any sense? Bohning now sells a jig that comes pre-set from the factory for the recommended offset of blazers.

All times are GMT -8. The time now is 07:30 PM.