Adjusting Allegience DL
 

For switching the draw length on an Allegience, do you need to buy new modules or can it be adjusted as is? I can't really get a definitive answer from the few searches I've done. If the modules need to be purchased, what do they generally run?

RE: Adjusting Allegience DL
 

You can buy modules if 1/2" increments from any bowtech dealer. You will need a new module to change draw length. Minute draw length adjustments can be made using the draw stop peg but that will also affect your letoff and feel of your valley. I think they run about $20.

RE: Adjusting Allegience DL
 

Mods will do 1/2" or more adjustments, however smaller than 1/2" can be done by twisting cables or moving the draw stop.

RE: Adjusting Allegience DL
 

Thanks guys.