Grayling troubles
 

Ok,guys i thought i had it but i apparently dont i will show you how my arrows are coming out and let you see if you can tell me what is wrong ti looks kinda like a plane and i am tired of wating platinum fletch tite and arrow wraps and not to mention blazers

RE: Grayling troubles
 

There are 3 different.....aw, hell, I don't know what they are, but they go in the dial behind the nock.....You may have the wrong one in there......You should have gotten 2 w/ 3 vanes and 1 w/ 4..... It looks to me like you have the one for 4 vanes in it.....Are you turning the dial or the arrow in the clamp?

RE: Grayling troubles
 

i am turning the dial and i thought about that mo i was thinking the same thing and i was like nahh cant be taht i am just screwing up but i sure as heck dont need 4 vanes on a FMJ for hunting

RE: Grayling troubles
 

It really looks to me like the thing is set up w/ the 4 fletch thingy....Do you still have the ones for 3?

RE: Grayling troubles
 

bought it used only came with that one[&:]the guys didnt specify and i ddnt have teh brains to ask for 20 bucks i jumped all over it like a coyote on a dieing rabbit

RE: Grayling troubles
 

I'll almost bet ya that's what it is.....take the dial apart, you'll see what I'm talking about when you get into it. It's a dial stop that does just like what it sounds....it stops the dial in the same postion when you turn it. If it's equipped w/ the 4 fletch, maybe try to contact Grayling and see if you can get the 3.....OR.....turn the arrow in the clamp and hope you get them where you want it.

RE: Grayling troubles
 

i am tired of hoping[&:]:Di will call grayling and ask em if they will send me a three clamo maby i can make an exceptional customer service post or a bad one

RE: Grayling troubles
 

Did you take it apart and check?

RE: Grayling troubles
 

LOL

RE: Grayling troubles
 

hey, i've got a couple of the 3 fletch disks. i broke my jig while moving. i've also got a couple clamps for that jig - a straight, a left, and a right. you want them?

RE: Grayling troubles
 

i dont need the clamps but i will take one of the disks gibblett is it free or how much do you want

RE: Grayling troubles
 

pm me your addy and i'll send it, no charge.

RE: Grayling troubles
 

pm is there gibblett

RE: Grayling troubles
 

Once again....another reason this is the best site on the net!! Gibblet, I've spoke to you before, but when my new Vectrix comes in, I'll be ordering a set.

RE: Grayling troubles
 

already told him i will be when i get mine mo;)

RE: Grayling troubles
 

sure you don't want the clamps too?

RE: Grayling troubles
 

yea

RE: Grayling troubles
 

hey I will take those clamps if you still have them!

RE: Grayling troubles
 

aaa'aight

RE: Grayling troubles
 

got em today gibblett thanks again

RE: Grayling troubles
 

Gibblet

I got the clamps in the mail today
Thanks!
Mike.