WB fletching
 

Whatwould be the best fletching brand for use with the Wisker Bisquit?

RE: WB fletching
 

as long as your bow is set up and tuned correctly any fletching will work with the wisker biscuit. I prefer blazers but thats just my opinion.

RE: WB fletching
 

My favorite vanes for the Biscuit are Vanetecs. Blazers work well, and Flex Fletch. Feathers are very good too. Softer vanes like AAE Plastifletch and Duravanes will get wavy and distorted after a while.

RE: WB fletching
 

I use blazers and vantec with the bisquit and both have held up the best so far.

RE: WB fletching
 

When I used the WB I preferred the softer vanes like Duravanes. The Blazers made more noise to me.

RE: WB fletching
 

jimneye, most any fletching will work. I use Bohning 4 inch vanes.
I also put a dab of glue on the front edge of the vane.
Good luck and Welcome to the board!

RE: WB fletching
 

Blazers, with out a doubt.

RE: WB fletching
 

Pick whatever fletchings you want. They all will shoot fine through a Whisker Biscuit if set up correctly and the correct size opening used. Personally, I use some cheapo 4in vanes that my Pro-shop has in stock. Have shot thousands of shots with no damage at all.

Good Luck

RE: WB fletching
 

feathers go through the WB better then anythign else just try it out. put an arrow in and tip the bow vanes will catch alittle, feathers will fall right through. the bristles move and the feather lays down going through. if you want plastic shoot balzers.