help!!! hoyt with T.R dropzone
 

hey techies!!!!

I'm trying to mount dropzone on a hoyt havatech....... do i need a special mount to put this on cause it don't look like it will fit right...
thanks for you help!!

RE: help!!! hoyt with T.R dropzone
 

It should work fine. I've no experience specific to your question, butI haven't seen a Hoyt bow it won't mount to.

RE: help!!! hoyt with T.R dropzone
 

technically speaking there is a waffer that you can put on the bow, but if i were you i'd throw that T.R. in the garbage and buy a schaffer rest... it is made for the tec riser and it functions much better..

RE: help!!! hoyt with T.R dropzone
 

I had a dropzone on my trykon for a total of 3 days and realized it was junk on a Tek Riser. You have to wrap the chord around the bridge on the riser and it rubs. This caused my rest to start hanging up and not dropping. I think it might be fine for any other bow without the tec riser. I made a 100.00 mistake. and now i have a dropzone in my junk closet. I went back to my muzzy zero effect, stupid for ever trying anything else.

RE: help!!! hoyt with T.R dropzone
 

big worm,

you are right about the rubbing and that is what i was most worried about talked to T.R tech support and i'm adding moleskin to the area where it rubs and that should take care of any friction...... thanks for all the help!!!