? for bisquit users
 

Right now i am shooting Carbon Tech arrows through my bisquit and they are LOUD as i draw.My question is, whatarrows draw the quietest through your bisquit? Or what can i do to quiet my arrows down?Is alluminum quieter than carbon?

RE: ? for bisquit users
 

I been using carbons through my biscuitand they are extremely quiet for me........I'm using the small diameter biscuit too....works great.

RE: ? for bisquit users
 

i don't have a problem with my carbons making noise... your bisquit size could be too small. that would increase the sound.

RE: ? for bisquit users
 

What kind of carbons are you guys using?my bisquit came with a large hole.

RE: ? for bisquit users
 

they make biscuits with large holes for aluminums and smaller holes for carbons...I've only used the smaler one with my carbons and it has worked great....quiet too.

RE: ? for bisquit users
 

So maybe the large hole is making my arrow louder[&:]

RE: ? for bisquit users
 

I use Bemans through the whisker. I have the large hole Bisquit. Mines almost silent

RE: ? for bisquit users
 

Couldn't really say cause I never used the large hole...but looks as if some other guys use the large hole and its quiet...so not too sure at all...I know the small hole is specifically for carbons and they are more snug and quiet too.....

RE: ? for bisquit users
 

I quited my bisquit down and as far as I'm concerned there are only two ways to do so #1 switch to a drop away:D
#2 put Cotton batten in your ears:D:D

RE: ? for bisquit users
 

I used to shoot a drop away and switched to a bisquit this spring and don't regret it at all. But I did hear the arrow when drawing back. The simple solution is a smooth finish shaft. I switched to beman BlackMax for hunting and there is absolutely no noise to be heard anymore. Axis arows are also made with the same smooth finish.

RE: ? for bisquit users
 

Newman, what Carbon Techs are you using? I have the Cheetahs, and they can make a hiss when drawn. They do not seem as noisy when I am shooting 3D in the woods as when I am shooting indoors. ACCs are pretty quiet, but you can hear them just a little. Rubbing them down with wax makes them very quiet. Clean, smooth finish carbons like the Axis or Black Max are pretty much silent.

RE: ? for bisquit users
 

Have to agree, have the larger diameter, or well use 230 shafts and hole is large, but no noise when drawing, something doesn't seem right. Not doubting but could it be something else seeming like it is the WB?

RE: ? for bisquit users
 

I really doubt it is the hole size. If it was, the smaller hole would make more noise. 95% sure it is just the arrow finish. I asked the ? about which Carbon Tech mostly because I really think highly of their arrow quality, but the Cheetahs I have do make noise when drawn, compared to other arrows I have. JL, the older Beman Hunter arrows, as well as the AFC carbons (I have 4 of these) are absolutely silent when drawn with my biscuit, which is the large size. Had the Biscuit or drop aways been available in the '90s, I may never have stopped shooting them. I remember a few years ago I was shooting Carbon Express camo arrows, and they were pretty quiet when drawn throught the Biscuit. I went to the shop to get another dozen, and they had a new camo pattern that was incredibly loud on the draw. I ended up selling them.[&:]

RE: ? for bisquit users
 

I am shooting Whitetail XP's

RE: ? for bisquit users
 

I a shooting Goldtip 5575 through mine with the small hole and dont have any noise problems. Could your biscuit be out of square a little?

RE: ? for bisquit users
 

Gold tips here, and quiet as a mouse!!

RE: ? for bisquit users
 

Newman1,

Try polishing your arrows with car polish.
I did that with the earlier goldtips, that were loud.
The carbontech finish is similar to the older goldtips.
The polish did a real good job of quieting the goldtips.

RE: ? for bisquit users
 

Thanks i will give it a shot,But last night i had a brainstorm[&:],I just got this bisquit off the net and have yet to get the bow tuned and have just been playin around due to being financially challenged at this time.My Allegiance is brand new and i have been using the release on the string using the nock and little rubber buttons that Bowtech had on there.I am starting to think that the nock point is not correct and when i draw it is forcing a little to much pressure on the arrow and making the arrow loud.When i draw with fingers only the arrows are deadly quiet.I guess i gotta suck it up and get into the shop:)

RE: ? for bisquit users
 

I just switched from a WB to a QAD ultra-rest... the first thing i noticed was how much quieter my draw was...
I shoot GT 5575's. Rather than spend money on new arrows, get a new rest. My accuracy improved greatly w/ a drop away (mostly became more consistent)... Many guys love the WB, I did, until i tried the QAD.last years model is on sale at cabelas bargin cave....

RE: ? for bisquit users
 

Get a new rest. Seems like the simplist solution to me!

RE: ? for bisquit users
 

GT 5575 & Beman ICS Hunters here .......... pretty quiet so far.