RE: Fletching: Offset vs. Helical
 

I have no experience with the ez fletch but it should work . I like an open design like the Bitz or JoJan. That way you can wipe off any excess glue before it dries.

RE: Fletching: Offset vs. Helical
 

The best way to get off excess glue is to do it before you put the fletch on the shaft.

Take your bottle and squirt a bead along the base of the fletch while it is in the clamp.
Then take the clamp and dab the base of the fletch on a paper towel. This will spread the glue out evenly and remove all of the excess. When you put the fletch on the shaft, you get just a tiny bead that oozes out from under the base and ensures good adhesion.

RE: Fletching: Offset vs. Helical
 

98'S got a good tip, I will also put just a dot on the front of the vane after it dries. just me.