|
Fall A-Ways (review from another Forum)
Skinner Response #9 posted 01/20/2006 09:59 am EST. [hr]I'm currently using 3 different drop-away rests on my 3 bows. Here are the pros and cons of each: Ripcord: Reliability: A+ Has work as advertised Noise on draw: A+ Noise on shot: C In spite of padding on the shelf, moleskin on the forks, it makes a moderate amount of noise on the shot. No noise at all on the draw, however. Fletching clearance: A+ No problems with blazers Containment: C- Contains the arrow perfectly unless you draw and let down, then the rest falls and the arrow can go tumbling. QAD UltraRest: Reliability: A+ Noise on Draw: A+ Noise on shot: D- The noisest of the bunch, in spite of constant tweaking. Silent on the draw, but sounds like snapping your fingers real loud on the shot. Fletching clearance: A+ No problem with blazers Containment: A+ Holds the arrow till the shot, and still holds the arrow on letdown. Won't fall unless you shoot. VBG Ultimate Fall Away Reliability: A+ Noise on draw: A+ Noise on shot: B+ The quietest of the bunch. No noise on draw. Some light noise on shot. Fletching Clearance: A+ No problem with blazers Containment: A- This rest recaptures the arrow if you let down. The only problem is this is the older design with only one "hook" to capture the arrow. If you lay your bow across your lap and tap the arrow, it can come out. The new design has two "hooks" so this can't happen. I'm going to try one of those this year. As you might guess from the above, containment and quietness are the big variables above. All of the rests were silent on the draw (after tweaking some of them with moleskin), and all make variable amounts of noise on the shot. My big thing after I've killed enough deer for the year is drawing on a deer just like I was going for the kill, and then letting down without getting caught. I've probably done that on 50 deer this year. That's why the arrow staying captured is so important to me, and the main reason the Ripcord is my least favorite of the above three. The importance of silence on the draw goes without saying and all of the three above were fine. This issue is the main reason I quit shooting the biscuit. The biscuit was quiet with A/C/C's, but noisy on the draw with GoldTips. |
RE: Fall A-Ways (review from another Forum)
Thanks for the report/link.
|
RE: Fall A-Ways (review from another Forum)
Hoping people who like the format might post additional reviews with the same categories; WB, TT, NAP, etc.
|
RE: Fall A-Ways (review from another Forum)
Does any one know how the trophy ridge drop zone works?
What causes the rest to raise when drawn? Does it have string, cord, exct? |
RE: Fall A-Ways (review from another Forum)
Only thing I can add is this to the QAD. My QAD is totally silent upon release. His must be hitting the shelf or something is wrong with it.
|
RE: Fall A-Ways (review from another Forum)
This is one persons oppinion , myself and otherS have had contact issues with the qad .
|
RE: Fall A-Ways (review from another Forum)
Good report
I have the qad ,and like cougar , i have NO issues with sound or contact |
RE: Fall A-Ways (review from another Forum)
I have had no issues with noise from the QAD. This is not the first time a reviewer mentioned noise with that rest, and I just can't hear any. (Since I can hear "Biscuit slap" and STS slap, I'd think I could hear the QAD if it was noisy. I do have the launcher falling onto a pad of mole foam. On the other hand, I did have contact and hangup problems. The Muzzy and Drop Zone are two that look at as well.
|
| All times are GMT -8. The time now is 10:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.