What is involved in lengthening draw length?
#1
Thread Starter
Join Date: Oct 2004
Location: San Diego, Ca.
Posts: 1,148
What is involved in lengthening draw length?
Is it a big deal to change a bow with a draw length from 25 inches to 29?
A buddy told me you might need to change out parts in the cam etc.. but he's not sure, it might just be a minor adjustment to the cams to lengthen it.
The bow is an Allegiancebinary cam going from 25 inches to 28 or 29.
Thanks,
Metro
A buddy told me you might need to change out parts in the cam etc.. but he's not sure, it might just be a minor adjustment to the cams to lengthen it.
The bow is an Allegiancebinary cam going from 25 inches to 28 or 29.
Thanks,
Metro
#2
Fork Horn
Join Date: Feb 2003
Location: OHIO
Posts: 296
RE: What is involved in lengthening draw length?
You have to change BOTH cams to adjust draw length,but thats all,strings and cables will be the same.Take the bow to your local BowTech Dealer,he should be able to help you get it set up for the right draw length.
Thread
Thread Starter
Forum
Replies
Last Post
Mathewsboy
Bowhunting
7
07-22-2004 09:02 AM