Hoyt v tec making a clicking sound
 

I have owned my v tec for about two months, roughly 500 shots, and recently it has started meking a clicking or ticking sound when I begin to draw. It only clicks once or twice and only when I start to draw. I think it is coming from the upper cam, not 100% sure on that. Does anyone have any idea as to what this may be and how to fix it. Thanks Ash

RE: Hoyt v tec making a clicking sound
 

mine 2 on my xtec

RE: Hoyt v tec making a clicking sound
 

Not sur ewhat woudl be causing it, not sure if theres bearings in thoes cams or not. maybe oil the cams and see if it goes away. I shoot a pse and havent hand any noise from my cams.

RE: Hoyt v tec making a clicking sound
 

Look and the "new bow question" thread. I 'think' all hoyts have sealed bearing cams...and if its the same as the problem in the other thread, go the same route he did (have felt put on the cam/string where it is "nocking")

RE: Hoyt v tec making a clicking sound
 

Another thing to check, I have seen sting wax create a similar affect. What happens is the wax build up in the cam groove will stick to your string & creates a mini vacum type of situation and creates a popping sound.

RE: Hoyt v tec making a clicking sound
 

Orions Bow, I think I will check that. I remember looking at the cam and seeing some wax on it. Maybe that is it, I hope.

RE: Hoyt v tec making a clicking sound
 

If it's not the problem stated above it could be the limbs. I had to take mine apart and lube the limbs and limb pockets to get rid of a clicking/creaking noise the bow developed after a 100 shots or so. It' actually an all to common problem with the new Hoyts.