Changing letoff on bowtech
 

Just got a used bowtech liberty. It sure don't feel like no 80% letoff. I was wondering if anyone knows how to adjust or see if it is 80%. Would adjusting changed the tune?

RE: Changing letoff on bowtech
 

What kind of cam does it have? Most of the single cams adjust by using a different module and draw stop setting. Your shop should have chart, or you might find one online. I think my manual for my mighty might has one in it.

You can adjust a slight valley into them as well.

You could also just shorten the draw stop a little I think and it will have less let off. Might be the other way around though, I would have to look.

We have some pretty serious bowtech guys there though, I am sure someone will give you a more precise answer if you wait long enough. Or just call bowtech.

Paul

RE: Changing letoff on bowtech
 

Here ya go. Page 4.

http://www.bowtecharchery.com/downloads/2004OwnersManual.pdf

RE: Changing letoff on bowtech
 

Thanks Bigbulls, after looking at your attachment, its setup correctly for 80% letoff, but its more liek 60%. I tried playing withthat draw stop and it didn't make any difference.

RE: Changing letoff on bowtech
 

What number module do you have on the cam?

RE: Changing letoff on bowtech
 

Got a F1.5 for 29.5" draw length

RE: Changing letoff on bowtech
 

Since it'sa 'used' bow, someone may have installed the wrong length string or cable. If you want to confirm all the settings,my shop is very knowledgeable on BowTech bows.

RE: Changing letoff on bowtech
 

I will be by your shop this week if my stiffer arrows come in. Maybe take a look.

RE: Changing letoff on bowtech
 

Have you checked the peak weight and the holding weight of the bow?