2117 = 11/32" or 5/16" shaft?
Can't remember and can't find any info. Thanks.
|
RE: 2117 = 11/32" or 5/16" shaft?
MO, i believe they are 21/64". I'm pretty sure (someone correct me if I'm wrong)that the 21 is the diameter and the 17 means the wall thickness is .017" Hope this helps.
|
RE: 2117 = 11/32" or 5/16" shaft?
dwd, you are correct/ First two numbers are shaft diameter in 64ths of an inch. Second two numbers are wall thickness in thousanths of an inch.
|
RE: 2117 = 11/32" or 5/16" shaft?
Ok. I guess I better clarify my question. Which size of the gule on type nocks that fit a swaged end will fit a 21XX shaft? I guess the 11/32" since its slightly larger than a 21XX diameter sized shaft.
|
RE: 2117 = 11/32" or 5/16" shaft?
5/16
|
RE: 2117 = 11/32" or 5/16" shaft?
Yep. 5/16.
|
RE: 2117 = 11/32" or 5/16" shaft?
Thanks guys.
|
RE: 2117 = 11/32" or 5/16" shaft?
Sorry MO, I misunderstood.
|
RE: 2117 = 11/32" or 5/16" shaft?
Ok. I guess I better clarify my question. Which size of the gule on type nocks that fit a swaged end will fit a 21XX shaft? I guess the 11/32" since its slightly larger than a 21XX diameter sized shaft. |
RE: 2117 = 11/32" or 5/16" shaft?
These arrows are for a recurve and I'm just starting out, so at this point, I don't see the need to go through the trouble.
|
All times are GMT -8. The time now is 06:40 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.