hoyt cybertec
 

I HAVE A HOYT CYBERTEC AND I LOVE IT BUT IT HAS NO "VALLEY" YOU HAVE TO HOLD HARD AGAINST THE WALL. IF I CREEP SLIGHTLY, THE CAM WANTS TO FLIP. THE CAM AND 1/2 WAS NOT OUT YET WHEN I BOUGHT THIS BOW. COULD AN ADJUSTMENT CREATE THE VALLEY I NEED? I'M ALSO THINKING ABOUT HAVING IT CHANGED OUT TO THE CAM AND 1/2. THANKS IN ADVANCE TO ANY RESPONSE.

RE: hoyt cybertec
 

What cam do you have?

RE: hoyt cybertec
 

sorry, it's got the versa cam

RE: hoyt cybertec
 

If you have the bow adjusted to the 65% setting, you might try setting it to the 80% post. You must move the module and the post to its corresponding hole, or your draw length will change as well, however. You might do best to take it to a local Hoyt dealer if that doesn't make sense to you.

RE: hoyt cybertec
 

I have a varsa cam bow, the draw stop in the holes determines let off,if I remember right, put the peg in the 80% hole for the most let off.

ps it's chaeaper to buy a new cam .5 bow, than it is to change the limbs and cams and strings and cables on the old one.