CHECK THIS OUT!! "IRON OUT" YOUR VANES!
#1
Thread Starter
Join Date: Sep 2005
Location:
Posts: 24
CHECK THIS OUT!! "IRON OUT" YOUR VANES!
Sick of fletching arrows after your vanes become worn and wrinkled? I discovered this eariler tonight and thought I'd share if no one's talked about it before. Many of my Quikspins were wrinkled via rest contact/tight groupings, etc. So about 5 inches under thelow spot(s)of the"waves" for a brief second or two I held acigarette lighter and waved it quickly. REAL QUICK LIKE, as too much heatwill obviously melt them.But for just a second, and witha quick front-to-back stroke, tah-dah!Pretty well straightened out.There yougo, no more re-fletchingbecauseyour vanes are looking worn out. (As for holes in vanes, probably oughta use a jig and a new vane, duh.)Any thoughts?
#3
RE: CHECK THIS OUT!! "IRON OUT" YOUR VANES!
Trapper, I've always used a hairdryer myself and they straightened right out. I guess it depends on how bad they are wrinkled and what type of vanes they are.
#7
RE: CHECK THIS OUT!! "IRON OUT" YOUR VANES!
Hmm, a lighter you say? I have some worn out vanes that I was going to refletch but I will give the lighter trick a whirl when I am down at the shop later today.
#10
RE: CHECK THIS OUT!! "IRON OUT" YOUR VANES!
The best way I found to straighten my vanes was to boil some water and stick the fletched end in the water for a few short seconds. Something with the boiling water and the heat straightens them out almost perfectly.