setting draw length
 

Hey there, I am trying to set up a longer draw length on my sons browning rage bow. My question is, I know I move the set screws in the cams on up to the next settings but do I need a bow press to do this? If so, I guess we are off to the bow shop.

Thanks

RE: setting draw length
 

I adjusted my draw length by moving the set screws on my cam. i don't know if this was the correct way to do it, but it worked. On my cam there is a little "L" and a "S" For longer or shorter draw length. But, I'm certainly no techie, so take what I say with a grain of salt. Good luck!:)

RE: setting draw length
 

If your Bow has the Hypermax10 cam, then no press is needed
for the drawlength adjustment, according to there website.
Check your owner's a manual or download it from there site.
Here's a link http://www.browning-archery.com/products/2005_br_bows/rage.htm
Good luck bill