Finally Figured out my problem
Some of you may recall that I had several posts here in the past few weeks whining about not being able to shoot a group with my broadheads out of my new switchback. Well, last night I was at the shop again, and the guy set it up just right, and said F**K paper tuning, I don't wast my time on it with these new bows...and he explained why. Well I got home and had the exact same problem. Well almost, The groups were tighter, but I was shooting with the Lumenoks, and I could clearly see that the arrow was not flying anywhere near straight. The arrows I am using are off of my old bow, they are CX 300 hunters,and are fairly short, the broadhead only clears the rest by about a half inch at full draw. I decided they must be acting too stiff being that short. I tried some of my buddies 30" arrows, but they were CX400's. They hit and grouped very well, but they had the same, spiral type flight. After I packed everything upI remembered that my dad has some 29" CX300's for his Mathews. I grabbed some of his arrows and set them up with my lumenoks and broadheads. I shot them a few times and BINGO! They fley perfect! They hit exactly where my field points hit too! WOOOHOOO! Its about time! The season is 8 days away, I was getting nervous! I can't believe that there is that much ofa difference between my 27" CX 300 Hunters, and my dads 29" CX 300's.
|
RE: Finally Figured out my problem
grabbed some of his arrows and set them up with my lumenoks and broadheads. |
RE: Finally Figured out my problem
I believe the Lumenoks are 22 grains?????
I was used them most of the year without the lumenoks and it didn't really make a dif. |
RE: Finally Figured out my problem
I had the same problem with my Switchback. I could not shoot a tight pattern. The local pro here told me to go to a 125 gr tip instead of the 100s. What adifference 25grs made. I'm now shooting consistent 3 in groups at 30yds
|
RE: Finally Figured out my problem
I found Switchbacks DEF don't like a stiff arrow......generally I would shoot CX300s or a .340 class spine with my setup...but w/ the SB, .400s were the ticket.
|
RE: Finally Figured out my problem
I was shooting with the Lumenoks ORIGINAL: supaarcher luminocks=junk , dont know why I have to say this but , my oppinion . |
RE: Finally Figured out my problem
I read an add yeasterday stating they " only add 22 grains to the arrow".
Is that 22 grains ABOVE the weight of the original nock they replaced?? If so your looking at a lot of asswieght[8D]. |
RE: Finally Figured out my problem
ORIGINAL: DaveC If so your looking at a lot of asswieght[8D]. |
RE: Finally Figured out my problem
ORIGINAL: DaveC I read an add yeasterday stating they " only add 22 grains to the arrow". Is that 22 grains ABOVE the weight of the original nock they replaced?? If so your looking at a lot of asswieght[8D]. 22 grains total weight. About 10 grains heavier than a standard nock. To me not worth the money or the FOC change. I don't need to see my arrow fly. I know where it went--right where the sight was when the bow went off. |
RE: Finally Figured out my problem
My problem with luminocks was not weight , but fit .
Good one Jeff "whole lot of love" |
All times are GMT -8. The time now is 12:05 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.