Which would you use?
 

These are the arrow selections that I am considering......

1.) Terminator Hunter 6075 at 28" with 4" feathers and 100gr Muzzys at 455gr total and 260 fps.

or

2.) Axis 340 at 28" with 4" vanes and 125gr Stinger 4-blade at approximatly 440gr and about 265fps.

Which would you choose for deer?

RE: Which would you use?
 

My choice would be the terminators with feathers but with the stingers instead of the muzzies.

I would also spend the little bit extra for the selects.

RE: Which would you use?
 

Bigbulls, they are selects. Thanks for replying.

HILLBILLY

RE: Which would you use?
 

Those are some excelent shafts. Super tough and tolerances are great. Much better than the axis shafts. I used them last year with excelent results and will very likley use them again this year. The CX400's I decided to try this year may be just a little too light for my tastes. A little too much noise at the shot.

No question about it. I would go with the Terminator selects.

You will never notice the 5 fps difference in the two shafts.

RE: Which would you use?
 

Though I typically prefer Easton products I like the Terminators but would go with 4 inch vanes and the Muzzy combination...:)