Arrow weight + velocity = penetration SURVEY!
 

Hello, I'm new here and was thinking of changing my arrow setup. What setup do you use in regards to....

1.) What type and brandof arrow(aluminum or carbon) do you shoot?

2.) What does your arrow and broadhead weigh?

3.) What velocity doyou get from your setup?

4.) What type of broadhead do you use?

5.) How much penetration do you get on whitetail deer?

Thanks,

HILLBILLY

RE: Arrow weight + velocity = penetration SURVEY!
 

1. Easton XX78 2219 29" long
2. around 600grains
3. chronographed at 233 fps
4. 125 grain Thunderheads
5. Complete passthroughts on every deer and even moose I`ve shot!:D

RE: Arrow weight + velocity = penetration SURVEY!
 

Darn near identical to Turkman's setup....

1. Easton XX75 2315 30.5" long
2.568 grains
3. estimated around 235 fps
4. 125 grain Magnus Stingers & 125 grain Slick Tricks (either/or)
5. Will be a total pass through (the stingers almost pass through my practice target! [&:])

Butch A.

RE: Arrow weight + velocity = penetration SURVEY!
 

28" Beaman ICS Hunter 340(ACC's are too expensive after the kid)
460gr
265fps chronographed
125gr Rocky mt Titanium or Thunderheads
Complete passthrough on deer, elk, bear, coyote, pronghorn and everything else I have shot.:D I love this setup.

RE: Arrow weight + velocity = penetration SURVEY!
 

28 inch Carbon Tech Whitetail's
373 grains
chronographed @ 299 fps.
100 grain 4-blade muzzy's
have not shot deer yet ,but expect nothing less than complete pass-:D thru

RE: Arrow weight + velocity = penetration SURVEY!
 

29.5 inch 3/71 ACC's
444 grains
287 fps
Slicktricks
Passthroughs

RE: Arrow weight + velocity = penetration SURVEY!
 

My current set up is new and I haven't weighed and measured everything yet so I'll list last years set up.

29.5 inch terminator select 60-75
125 grain Slick Tricks
Total arrow weight = 491 grains
Speed was 265 fps making 76 foot pounds of KE.
Complete pass throughs.

RE: Arrow weight + velocity = penetration SURVEY!
 

Last year:

1- Carbon Express CX200 Hunter's, 28" long
2- 386 grains
3- 268 fps
4- NAP Scorpion XP 100's (mechanicals)
5- Complete pass through on 3 deer.

This year:

1 - Carbon Express CX200's, 27" long
2 - 356 grains
3 - 300 fps
4 - I will be using Wasp Sharpshooters or Stingers this year. Cut-on-contact should be better for penetration.
5 - KE is up to 71 ft/lbs so I have no worries about pass throughs this year.

RE: Arrow weight + velocity = penetration SURVEY!
 

xx75 2219 28" long
550 or so grains
230 something fps
thunderhead 100's
All pass thru's last year.

RE: Arrow weight + velocity = penetration SURVEY!
 

I'll just post the set up I've killed the most deer with.
xx75 2413/T-head 125 = 525 total weight at 230-235 fps
17 deer-9 complete pass thrus,5 shots that failed to punch an exit hole.