RE: what do you use
 

I use four inch Duravanes on Carbon Express Terminators with 100 grain
Spitfire Mech. Also the vanes are put on right offset.

RE: what do you use
 

Actually they were designed to be put on anywhere from straight to a hard right helical. Straight they still spin but the more offset you get with them they spin even faster.

My set up will be a Carbon Express CX400 with a white crest and 4 three inch feathers on a hard right helical. Tipped with either 100 or 125 grain slick tricks, which are a fixed 4 blade head with a 1-1/8th inch cutting diameter, and cut to 30 inches. Will also be trying out the magnocks for the first time this year (will see how they work).

Will be useing a BT alleginace and the 100 grain heads should be somewhere in the neighborhood of 300 fps and the 125 grain heads should be about 295 fps.

RE: what do you use
 

I know that Motown. I like helical.

RE: what do you use
 

I spoke with the tech at NAP about how to properly fletch the Quik Spins, and they said not straight but a slight right offset if using a straight clamp and a slight right helical if using a right helical clamp. They said it's not the best to do a hard helical, but a 1-2 degree offset is just about right.

RE: what do you use
 

Turbo Nocks, Hunters. Rocky Mt. Turbo broadhead 100gr

RE: what do you use
 

HUH

RE: what do you use
 

For 3D, I use 85 grain screw in points, and 4" Vane Tec's on a slight offset. For hunting, I am using 125 grain slick tricks, with 4" vane tecs on a full hard right helical.

RE: what do you use
 

beman ics 400, thunderhead 100, 4" slight offset. I'll be going to a helical next year when I buy my jig. no time or money this year. Never had an ounce of problems with accuracy.

RE: what do you use
 

Carbon express CX200s cut to 27"
EZE Crest wraps cut down to 1" wide
3 Bohning Blazer vanes attached with a right helical clamp and 2 degrees(guessing) offset
Easton UNI bushings with G-Nocks
I used NAP Scorpion XP 100's last year. I'm looking at the Buzzcuts, Wasp Sharpshooters or Slick Tricks to try out for this year.

RE: what do you use
 

My favorite is a three fletched arrow -feathers, 5 1/2 inch left wing helical shield cut. I use a 2018 arrow with a 145 grain flour blade muzzy.