Maybe its a tuning issue but........
 

I have fletched some new shafts with the Bohning Blazer 2" vanes and fletched the others with the Easton Diamond 4" vanes. Curiously enough, the 4" Diamond vaned arrows always produce better groups. My fletching is not hitting the rest and it doesn't matter if I shoot cockbird up or down. I'll alternate shooting each arrow. Perhaps some more intense tuning is needed, but so far I am leaning toward stripping the Blazers off and fletching all with the Easton Diamond 4" vanes.

RE: Maybe its a tuning issue but........
 

A shop owner in Michigan, a fellow Oneida shooter that I talk to on the Oneida forums, is sending me some Blazers too try out before I buy 100 pack. Ill report back. ;)

RE: Maybe its a tuning issue but........
 

Let me know how it turns out DK. I really like the Blazers and think I just need to tweak some things. Its very possible that my Blazer fletched shafts are revealing something, in fact I am almost sure it is so, but the fact remains the Diamond fletched shafts are shooting great at varying yardages.

RE: Maybe its a tuning issue but........
 

I would venture to say the bow is out of tune. The blazers simply cannot correct arrow flight as well as the other vanes. How does a bareshaft shoot?

RE: Maybe its a tuning issue but........
 

Your shooting 2 different arrows. They won't shoot the same. I'll bet the blazers don't weigh the same as the 4" vanes.

RE: Maybe its a tuning issue but........
 

Same arrows and the Blazers are a little lighter in weight.

Anyway, did some tiller tuning at 40 and 50 yards this evening, got the Blazers to group as well as the Easton Diamonds, and all it took was 1/4 turn of a limb bolt.:)

RE: Maybe its a tuning issue but........
 

Yep. By changing the tiller you changed the way the a$$ end was coming out of the bow. The 4" vanes came out lower than the blazers. Your foc was different.

RE: Maybe its a tuning issue but........
 

double post.:eek: