Looking for a new powder & load for my 223?
I own a Savage Model 12-fv chambered in 223-Remington. This is the load I worked up:
Fed small rifle primer 52-grain HPBT Sierra MatchKing bullet 27.5-grains of Varget. This rifle shoots this load very well. Over time I have grown to hate Varget powder. Varget is a pain for me to throw. I am looking for a good spherical or ball powder to try in my 223. Does anyone have any loads they would like to share? I will list a few powders I know I have, if it helps? H-335, H-380 H-BL-C (2) Reloader-10 Accurate 2230 Diaclaimer: I never start my loads at or near maximum. I always work my way up & check for signs of pressure.:) Thanks, Wolf Killer |
RE: Looking for a new powder & load for my 223?
Ballc-lot 2 is a good powder.Try some web sites out here or back to your reloading manuals to find ones you mlight like. I use accurate 2200 in mine,but you can,t get it anymore glad i got a bunch yrs ago. vangunsmith
|
RE: Looking for a new powder & load for my 223?
ORIGINAL: Wolf killer Does anyone have any loads they would like to share? I will list a few powders I know I have, if it helps? H-335, H-380 H-BL-C (2) Reloader-10 Accurate 2230 Thanks, Wolf Killer |
RE: Looking for a new powder & load for my 223?
Wolf Killer - H-380 is a little on the slow side for a .223, although it meters very well out of a powder measure. RL-12 is my "go to" powder for this caliber. WW-748 and H-335 are also at the top of the list. And if your "handle" means you are a coyote hunter, I would check out some of the plastic tipped bullets - like the V-max or Blitzking. Roskoe
|
RE: Looking for a new powder & load for my 223?
Varget is hard to thow? It is one of the best powders to work with that I use.
I admit a little crunchy in the measure but not bad compare to other extruded powders I've used. |
RE: Looking for a new powder & load for my 223?
hmmmmm if we had a post your load thread pinned to the top, Mr. Wolf Killer wouldnt have had to waste his valuable time typing this question!!!!! I could not agree more.:)[:@] |
RE: Looking for a new powder & load for my 223?
Lets all make a refernce to that thread we never recieved in each post!;)[8D]
Oh, and back to the question. I would also look into using W-748. I load a mid-range load with that and a 45 grain Speer SPT in my .223. It works very well. |
RE: Looking for a new powder & load for my 223?
BLC-2 , H335 or AA2230 take your pick all work great.
If I had to pick 1 it would be H 335 ,I have burned several 8 lb jugs in my Savage 110 V Behind a Nosler 50 gr BT the last few years. Johnch |
RE: Looking for a new powder & load for my 223?
Varget is hard to thow? It is one of the best powders to work with that I use. I admit a little crunchy in the measure but not bad compare to other extruded powders I've used. Pittsburghunter Can me anul if you like. I have fallen in love with spherical powders because they meter so well. 27.5-grains of Varget fills a 223 case plum full. I can switch to a spherical powder & avoid the mess. I have several loads ready to test at the range with AA-2230 & H-335. I just need a break in the weather. Thanks to all that have responded, Wolf Killer |
RE: Looking for a new powder & load for my 223?
My .223 likes 30gr of H335 with a 40gr Barnes VLC and 28.7gr of AA 2460 and a 40gr Hornady V-max. I use CCI 450 (small rifle mag) primers.
|
All times are GMT -8. The time now is 07:22 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.