Case stuck in chamber.
 

Shot my 7/08 this morning and the case seperated at the web anyone know how to get it out of the chamber without taking it to a gunsmith,Put some kroil oil in there and tried removeing it with a screw driver but didn't work,don't want to scratch the chamber up.

RE: Case stuck in chamber.
 

Try a long metal cleaning rod dropped down the Bbl. Just be gentle.

RE: Case stuck in chamber.
 

Get a .30 cal brass cleaning brush and put in in the chamber to the neck of the case. The case will come right out.

RE: Case stuck in chamber.
 

ColoradoElk gave you exactly the right advice.

RE: Case stuck in chamber.
 

A gunsmith removing the case is cheaper than a new barrel.
I have used this method but you must be carful , use as a last ditch.
1 Degrease the with rubing alc.
2 Insert a plug in the sholder area of the case ,NOT past the neck in the barrel
3 turn the gun muzzel down and clamp to hold
4 mix up some 5 min. epoxy and fill 1/2 of the case ,I use a syringe and vinyl tubing
DO NOT get epoxy anywhere but in the case ,you can realy mess up the gun.
5 wait over night and tap case with range rod
If you have even the slightest dought ,don't use this method go to a gunsmith!!!

NRA life
DU
NAHC Life
Pheasants Forever

RE: Case stuck in chamber.
 

Thanks fellows I finally got it out with a chamber brush .