Brass for a 7STW
 

Who uses what brand? I am leaning towards Remington .

RE: Brass for a 7STW
 

OEH,I don't have a STW "YET" but when I do,Remington brass is what I'll use! That's the only brass I reload...:D

RE: Brass for a 7STW
 

I am using remington brass.

RE: Brass for a 7STW
 

I purchased 100 new Remington STW brass from Midway. I sorted through 50 yesterday and I found that the case leangth was about .008" from max leangth. The flash holes seemed to be acceptable too. I usually use winchester brass though. Remington brass is on sale at Midway this month.

RE: Brass for a 7STW
 

I have been using Remington 8mm Rem. Mag. brass. Good luck.

RE: Brass for a 7STW
 

oldelkhunter
I use Remington nickel brass for my 7 stw, works great! Purchased it from www.deerfieldenterprises.com at ~$.21 a piece. give them a try i have had alot of good experiences with them and the company

[Deleted]
 

[Deleted by Admins]

RE: Brass for a 7STW
 

I use remington too, ive noticed the tolerance in case mouth wall thickness is much higher more even around the mouth and the brass stretches more evenly do to that, I dont have to trim my cases as often. I wouldnt use anything other then remington cases except in a pinch maybe winchester but there tolerance sucks and federals You would be lucky to get 4 reloading out of them the brass is to soft.

RE: Brass for a 7STW
 

I use Winchester brass in my 7mm STW , Winchester brass is more consistant than the Remington brass and seems to last longer. I like Remington brass but perfer the Winchester brand if it is available.:)

RE: Brass for a 7STW
 

I use Remington 7mm-STW brass also. I have never tried anything else in the rifle.

RE: Brass for a 7STW
 

remington. i buy from midway 100 at a time.