300 Win Mag
What are some yalls recipes the 300. Win Mag
|
RE: 300 Win Mag
It might help if you stated what you are shooting it in , what your shooting it at game or target ,what bullet weight for a starter . Hal
|
RE: 300 Win Mag
Here is my moose load
WW brass, LR ww primer ,180 gr. Rem corelock,75 gr IMR 4831. This gives me an average of 3006 fps 10 ft from the muzzle. I have shot 1/2 " groups (3 shot) at 100 yds.with this load out of my Win m-70 synthetic . PS. knocks moose over very well. |
RE: 300 Win Mag
LBRB, Do you really want to shoot loads put out by someone you've never met and know nothing about? Either buy a loading manual or two or go to some of the websites offered by bullet makers or powder manufacturers and start there. In any event, back off any single load or start with a lesser charge on published loads. Learn to tell if you have pressure problems. You also want to learn what shoots best in your rifle as well as what bullets work best for the shooting you do. A max. load may not be as accurate as a slightly slower load.
|
RE: 300 Win Mag
165 grain Sierra pointed soft point boattail, 67 grains of IMR4350, Federal large rifle magnum primers. Hornaday brass.
|
RE: 300 Win Mag
I've just started reloading and i was wanting to see what loads work the best for some of u guys. I'm Reloading 180 grain nosler BT w/ Reloader 22. I've got the Nosler #5. I'm shooting a Remington Model 700 Sendero SF
|
RE: 300 Win Mag
You really have to try different loads/bullets in your gun use what you get here as a guide. For instance my moose load is what my buddy shoots out of his Tikka but he uses Nosler partitions, it works well for him. I tried the partitions in my gun and got 1.5 -2" groups, just by switching to the corelocks my groups shrunk to 0.5-0.8" You got to try to find a load that your rifle likes thats the fun.
|
RE: 300 Win Mag
Here is a nice resource:
http://www.reloadersnest.com/frontpage.asp?CaliberID=61 Hope it helps! P.S. Go to home page and check out warnings/disclaimers first! Good luck. |
RE: 300 Win Mag
LBRB45, I reload for my nephew's .300 Win. Mag. and I use basically the same thing you are using....180 gr. Nosler BT and RL22, Win. brass and CCI magnum primers. He shoots them out of a Remington 700 BDL stainless snythetic w/ the muzzle brake. I've seen the accuracy of this load on paper firsthand and it is excellent for a hunting load! Also, it is devastating on whitetail deer![X(]:D
|
RE: 300 Win Mag
I am using RP brass, WLP primers, 72.6grs of IMR4831, and 180gr Sierra ProHunter bullet for an average velocity of 2960fps. Works well in my Rem 700 BDL with 24inch barrel.
|
All times are GMT -8. The time now is 02:31 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.