custom muzzleloader sizing dies
09-15-2014 | 06:52 PM
#1
Thread Starter
Nontypical Buck
Joined: Aug 2014
Posts: 1,168
Likes: 0
From: gilbert az
custom muzzleloader sizing dies
does anybody know who is doing custom sizer dies? mountian molds doesn't do them and stillwell does not seem to have a website ? i am having some custom molds made for my white rifles. thanks
Last edited by muzzlestuffer; 09-15-2014 at 06:54 PM. Reason: forgot something
09-15-2014 | 08:52 PM
#2
Giant Nontypical
Joined: Mar 2010
Posts: 5,612
Likes: 0
CH Tool and Die
Google CH4D
And DOUGHTY ENTERPRISES
his are even cheaper. Like $25
It looks like Lee is making them again too.
Google CH4D
And DOUGHTY ENTERPRISES
his are even cheaper. Like $25
It looks like Lee is making them again too.
- Custom lube and size kits are $34.00 plus shipping.
- Maximum bullet diameter is .575.
- Current lead time for Custom Lube and Size Kits is anywhere between 6 to 8 weeks.
MSRP: $$34.00
Last edited by Gm54-120; 09-15-2014 at 08:58 PM.
09-17-2014 | 04:56 AM
#4
Typical Buck
Joined: Jan 2012
Posts: 542
Likes: 2
I shoot a .451 White M97 and M98. I had this 465gr mold made by Accurate Molds. http://www.accuratemolds.com/bullet_...=45-465M-D.png
If you have a .451 White, I would get the Lee .452 sizing die. The bullets should come out measuring .451.5 and will still slide down very easily down your bore.
If you have a .451 White, I would get the Lee .452 sizing die. The bullets should come out measuring .451.5 and will still slide down very easily down your bore.
09-18-2014 | 04:50 AM
#6
Typical Buck
Joined: Jan 2012
Posts: 542
Likes: 2
I would check with Accurate Molds to see if you find a design that you like for your 504. I saw a 51-460M that looked like it would meet your needs. Also check out Lee sizing dies. You will need to have a custom 505 die by Lee. I don't think they are expensive to make up.
