What Reloader Is Good To Buy?
I used to use my Fathers RCBS Rockchucker, and a friends RCBS Rockcucker reloader in the 1980's. I think thats what it is called.
But things are made cheaper than they were back then. So my question is, Which reloader set up is any good. I would like to get a progressive press. Thank You, jrbsr |
Your Dad's RCBS Rockchucker will do a great job for you. Dillon makes a great progressive press. Good luck
|
Originally Posted by handloader1
(Post 3898454)
Your Dad's RCBS Rockchucker will do a great job for you. Dillon makes a great progressive press. Good luck
So I can't use it any more. My friend got to old to reload and gave his reloading stuff to his son. So I will have to get my own, when I can get the $$ I think I may get one of the torrent progressive press's that you just pop off the torrent to change calibers. |
Rockchucker is a fine press, I have been using mine for the past 24yrs.
|
I know more people who use a Rockchucker than I know who use any other press - there's absolutely nothing wrong with a single-stage. A progressive really shines if you're shooting a LOT (and reloading a LOT) of pistol- and small rifle-caliber ammunition. I've used Dillons (probably the gold-standard of progressives) and never have been able to duplicate the consistency I can achieve with the plain old Rockchucker if my goal is precision. Not to say that I can't turn out a LOT of plinking ammo with a progressive.
I've not been impressed with many of the "torrent" (turret?) presses I've looked at. Save the money and put it into the other accessories you need. It's not that difficult to change from one die to the next in a single-stage press. |
I have a RCBS Rockchucker press, I have used it over 20 years with out any problems, it is a great press. I recently got a Ponsness Warren Metalic II, multi stage press that I really like. I also have a Hornady Lock & Load Progressive press that works great, I only use it for loading my 223's.
|
Jrbsr:
Sorry about you losing your father. I lost my dad in 1981, and I really miss him. God bless you. |
RCBS Rockchucker ..... 25yrs and counting with no issues, it's been a very good press for me. Mike
|
I have a Rockchuker and have always liked it. Last year I bought a Lee Classic Turret and have really been impressed with it. I load all my pistol ammo on it and most of my rifle.
|
Press?
It depends on what you are loading and what volume of shooting you do. I have single stage for rifle and progressive for handguns. If you are not a "volume" shooter a quality progressive press is a waste of money.
The RCBS is an excellent choice in a single stage. GOOD LUCK and GOOD SHOOTING!!!! |
i done alot of research and rcbs is the way to go...as long as they arent bent, you can even buy an old one and it should last forever. i found whole kits, usually in the winter when im broke, online used for just a couple hundred bucks(not deer). so look for a good deal... craigslist?
|
Another option is the turret press, I have the Lyman T-mag. Reloading isn't as quick as a progressive, but it cost about the same as a single stage press. On my turret I have dies for .38 spcl, .380 acp, and 9mm. Changing between calibers is as easy as rotating the turret, and the dies stay in adjustment.
http://www.basspro.com/Lyman-TMag-II...0202721/144442 |
You can't go wrong with RCBS. My single stage Rock Chucker has been going strong since around 1980.
|
heres the thing
you can ask around and we can all tell you about what we use and what we like. which is great, but you make the decision in the end... i use an RCBS single stage, i go to the range with my rifles at least 3 times a month and poke at least 20 holes with each rifle i bring. usually my 7mmRM but sometimes a 7-08 and 45-70. 120 rounds minimum a month. I dont sit at the bench every night but i dont do a long haul once a month either. This is the same press my father used. and sometimes still uses. when was younger my dad and i went to the range at least 12 times a month. most of the time for a couple hours at a time. we took 2 .223 ARs , 2 .44's , 2 .357's, a 45 70, my own rifles one of them is my 7-08 and a 270, his 270 and some 22's which are cheap.Absolutely throw some brass. He reloaded all of this EVERY WEEK. except 22lr of course. using this single stage press. Used a progressive for a bit, sold it because he found it useless.
heres why if you shoot in your back yard every single day thousands of rounds per week, go ahead get a progressive. ive shot alot of rounds and never found a use for one because unless you either go with your buddies every other day and shoot 1000 rounds or shoot every day 1000 rounds a day its a waste of money. single stage press has my heart. i like a turret for handgun. |
somebody like um ^ my wife forgets to log out lol
somebody like um < her husband fails to pay attention and replies to posts. lol i wrote that jr lol ^^^ |
another vote for the Lyman T-Mag.
I load everything from .22 Hornet & .17 Remington to .45-70 and .300 Win Mag with it. |
Plenty of really good press' to choose from including today's Rockchucker.That said if you want the best Forster is IMO it.
http://www.midwayusa.com/product/265...le-stage-press |
I found my old 1980s RCBS RockChucker on craiglist for little or nothing.
Thing is practically brand new looking. All I use is RCBS products and they have outstanding customer service. |
The lee classic cast press is better than the RCBS rockchucker. There, I said it! It has one feature that makes it better, the way the spent primers are handled. They go straight through the middle of the hollow ram into a plastic hose that can be directed into a can, bottle or the cap can be left on the hose to accumulate the primers. It made of cast iron that has old railroad rails in it.
The all steel linkage is adjustable for right/left hand use and length of throw. It able to accept the LNL bushings ,,,,----if you're crazy enough to want to use them. Also, the lee safety prime makes primer feeding automatic. IIRC, it's also available with the lee breech lock bushings,(an answer to a problem that doesn't exist, same with the LNL). If you're wanting something that's faster than a single stage, then the lee classic turret is the answer. It too has the spent primer through the ram disposal system. Coupled with the safety prime and pro auto disk powder measure, it can easily make 300 rounds per hour. Caliber changes are less than a minute, IF you buy extra turrets at 10-12 bucks apiece. You set the dies once, never have to screw them in an out again. No, I don't work for lee. I just appreciate their loaders and related equipment. I've been loading since 1962, and using lee equipment for that long. The first shells I loaded were 8mm mauser loads using a classic lee hammer loader. Some call it the whack-a-mole-loader. |
All times are GMT -8. The time now is 10:07 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.