Loads for 7 mm R.M. and 140 gr TSX
#1
Nontypical Buck
Thread Starter
Join Date: Feb 2003
Location: MB.
Posts: 2,984
Loads for 7 mm R.M. and 140 gr TSX
I’m getting back into reloading for the 7 mm R. M... Now, at the time when I had my 7 mm R.M. they didn’t have the TSX. Would anyone have any good loads with the TSX that I could start with...Thx...
#3
Nontypical Buck
Thread Starter
Join Date: Feb 2003
Location: MB.
Posts: 2,984
RE: Loads for 7 mm R.M. and 140 gr TSX
Thanks stubblejumper for the loads. I’ll work it up slowly... I’m looking forward in getting back into the 7 mm bullet. I’ve gone around with different cartridges but decided to get back to what I’ve enjoyed shooting for years....
#4
RE: Loads for 7 mm R.M. and 140 gr TSX
+1 RL22 and 140gr TSX.RL22 is the first powder I try with the 7mm rem mag, in my rifleRL22 is by far the most used propellant for 140-160gr loads. If for some reason it doesn'tproduce I'd tryeither of the 4831's (had luck with both, but prefer H4831). Seems most guys have IMR4350 on hand likewise it's also worked with 140-150gr bullets in the rem mag.
#6
Fork Horn
Join Date: Jan 2007
Location: Idaho's Elk Country
Posts: 275
RE: Loads for 7 mm R.M. and 140 gr TSX
I run H1000 w/ 140TTSX . . . . found it to be a bit more consistant than 22 when the temps dropped. I shot 22 for a while but when I would go from 70 to 20 degrees I would lose like 150fps and groups would go from .75" to 1.5" with a shifted POI.
But maybe you'll have better luck than I did
Brett
But maybe you'll have better luck than I did
Brett
#7
Giant Nontypical
Join Date: Feb 2003
Location: fort mcmurray alberta canada
Posts: 5,667
RE: Loads for 7 mm R.M. and 140 gr TSX
I shot 22 for a while but when I would go from 70 to 20 degrees I would lose like 150fps and groups would go from .75" to 1.5" with a shifted POI.
#10
Nontypical Buck
Thread Starter
Join Date: Feb 2003
Location: MB.
Posts: 2,984
RE: Loads for 7 mm R.M. and 140 gr TSX
ORIGINAL: Pawildman
Hey trailer....is that 260 getting dust on it??....
Hey trailer....is that 260 getting dust on it??....