HuntingNet.com Forums
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   Imperial Sizing Die Wax (https://www.huntingnet.com/forum/reloading/266871-imperial-sizing-die-wax.html)

Pawildman 10-07-2008 10:58 AM
Imperial Sizing Die Wax
 
........Was looking thru my Midway catalog recently for other things, ans found the Imperial Sizing Wax. I've heard so many good things about it that I decided to give it a try since I was placing an order anyhow. I gotta tell you, I've been a Vaseline guy for many years and saw no reason to change, but I'm changed now!! This stuff is fantastic....The directions say to use sparingly, and they are right! A little goes a long way. I noticed the difference immediately. My press and dies are SOOOO much easier to operate...much smoother and with less effort than before with other lubes.
Any other comments from the others out there who are using it??? Don.

bigcountry 10-07-2008 11:02 AM
RE: Imperial Sizing Die Wax
 
I don't care much for it for case body, but for inside necks, i notice much more uniform concentricity.

HEAD0001 10-07-2008 03:24 PM
RE: Imperial Sizing Die Wax
 
I use it all the time. No dents. Tom.

DM 10-07-2008 05:58 PM
RE: Imperial Sizing Die Wax
 
ORIGINAL: Pawildman

........Was looking thru my Midway catalog recently for other things, ans found the Imperial Sizing Wax. I've heard so many good things about it that I decided to give it a try since I was placing an order anyhow. I gotta tell you, I've been a Vaseline guy for many years and saw no reason to change, but I'm changed now!! This stuff is fantastic....The directions say to use sparingly, and they are right! A little goes a long way. I noticed the difference immediately. My press and dies are SOOOO much easier to operate...much smoother and with less effort than before with other lubes.
Any other comments from the others out there who are using it??? Don.
I've been using it for many many years, and no matter what else i try, i always come back to it. I've found nothing better for heavy case forming too...

DM

goatbrother 10-07-2008 11:35 PM
RE: Imperial Sizing Die Wax
 
What is the clean up like?

Pawildman 10-08-2008 07:05 AM
RE: Imperial Sizing Die Wax
 
ORIGINAL: goatbrother

What is the clean up like?
Almost nothing. I use a towel to wipe off the case body, which is pretty clean anyhow due to the fact that you use so little to begin with, and a Q-Tip to wipe out the inside of the mouth. Very simple...........

bigcountry 10-08-2008 08:09 AM
RE: Imperial Sizing Die Wax
 
ORIGINAL: goatbrother

What is the clean up like?
Now this is the one thing I don't like about it on the case body. And like oneshot better. You wipe it off, but its time consuming.

Pawildman 10-08-2008 10:51 AM
RE: Imperial Sizing Die Wax
 
ORIGINAL: bigcountry

ORIGINAL: goatbrother

What is the clean up like?
Now this is the one thing I don't like about it on the case body. And like oneshot better. You wipe it off, but its time consuming.
bc.....I've had a can of Hornady's Oneshot on a shelf here for some time, and never tried it.....Do you turn the casings upside down before spraying to keep it off the shoulders? And how do you lube the inside of the neck before sizing, if that's the procedure? I was impressed with the Imperial...Same basic procedure I've always used. Now ya got me wonderin'....I just read on the Oneshot can that you let it dry before sizing. No clean-up after sizing??....

skb2706 10-08-2008 01:10 PM
RE: Imperial Sizing Die Wax
 
I never stuck a case in a die in the first thirty years of handloading....done it twice with Oneshot. The overspray makes it a waste and a can doesn't go that far. A tin of Imperial may last me the rest of my life.

bigcountry 10-08-2008 01:42 PM
RE: Imperial Sizing Die Wax
 
ORIGINAL: Pawildman

ORIGINAL: bigcountry

ORIGINAL: goatbrother

What is the clean up like?
Now this is the one thing I don't like about it on the case body. And like oneshot better. You wipe it off, but its time consuming.
bc.....I've had a can of Hornady's Oneshot on a shelf here for some time, and never tried it.....Do you turn the casings upside down before spraying to keep it off the shoulders? And how do you lube the inside of the neck before sizing, if that's the procedure? I was impressed with the Imperial...Same basic procedure I've always used. Now ya got me wonderin'....I just read on the Oneshot can that you let it dry before sizing. No clean-up after sizing??....
I love oneshot. What I do is line up two lines of 10 cases each (20 cases)with the mouths facing me. I spray over them at a 45 degree angle so I get some in the mouths. I wait 1 or so min and I take my hand and roll the cases to the other side. I do the same. I then will use my imperial with a Q-tip for inside case mouths. I don't care if the oneshot gets on the shoulders or neck. I love the stuff myself.

I just don't have time anymore to play around. If one has the time, go for it.

Anytime I am sizing down brass, I might use imperial.


All times are GMT -8. The time now is 03:28 AM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.