HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   25-06 Reloading (https://www.huntingnet.com/forum/reloading/24336-25-06-reloading.html)

DBL00BK 02-21-2003 02:47 PM

25-06 Reloading
 
For those who have the 25-06 what is the best load you think for a Remington Model 700 adl 25-06.[&:]I shoot a 120 grain bullet and it is for deer.(white tail). Sorry to the three that wrote to me before I edited sorry please edit yours or reply again please help.

halcon 02-21-2003 11:37 PM

RE: 25-06 Reloading
 
It would be very hard to say what would shoot good in someone else' s rifle . Not knowing what you were going to hunt with it ,or if your just target shooting . A round that works well in my rifle might work in yours ,but that is not always the case . That is one of the reasons we handload searching for the perfect round for OUR rifle. More info would help Halcon

PaJack 02-22-2003 12:36 PM

RE: 25-06 Reloading
 
Start with " ACCURACY" loads from a Sierra Manual...;)

Deleted User 02-22-2003 01:05 PM

[Deleted]
 
[Deleted by Admins]

halcon 02-22-2003 11:50 PM

RE: 25-06 Reloading
 
The accuracy load for a 120 gr bullet is 49 gr of IMR-4350
The hunting load is 53.1 gr of H4831 . these are from Sierra' s manual , but you would be wise to start a couple of grains under either load and work your way up to them . That way you can check your accuracy and watch for signs of pressure. This would be using Sierra bullets ,If you like something else then refer to a manual setup on that particular bullet if possible .

Vapodog 02-23-2003 09:57 AM

RE: 25-06 Reloading
 
look at the Hornady 120 grain hollow point and any of the very slow burning powders.....That is one great cartridge!!!

PaJack 02-23-2003 10:14 AM

RE: 25-06 Reloading
 
I also use 49.0gr of IMR 4350 and 120gr Hornady HP out of my T/C Encore...;)

Deleted User 02-23-2003 11:06 AM

[Deleted]
 
[Deleted by Admins]

Mykey 02-23-2003 04:26 PM

RE: 25-06 Reloading
 
I have the same gun and have several loads worked up that shoots good for me. I have had good results with IMR4350,4831,7828, with my best accuracy coming from the IMR7828, it gives good velocity with low pressure.

Speer 120grn bullet
55grns of IMR7828
CCI 200 Primer
Remington brass
COL = 3.160......010 off the lands in my rifle

that same bullet also groups well in my rifle with 49 grn of IMR4350 with the same COL.

Here' s a good web page to check out for some other 25.06 loads
www.realguns.com/loads/2506.htm
www.gunnersden.com/index.htm25-06remington.html



All times are GMT -8. The time now is 03:42 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.