Ingenuity: resizing lube pad??
 

Don't want to buy a lube pad, what could I use that I'd have around the house?? Would a fine knit wash cloth work ok? or would something else work???

Screw the 10 ring, keep them in the zero!!!

[Deleted]
 

[Deleted by Admins]

RE: Ingenuity: resizing lube pad??
 

I just use the small squeeze bottles of lube,and apply by hand,as I load them into the press.I do use the pad when using spray lube.the rcbs imperial die wax is supposedly the absolute best stuff to use.

desert eagle 50 ae and 440 corbon shooter

RE: Ingenuity: resizing lube pad??
 

One of the best moves I've ever made in reloading is to dump the lube pad and start using the spray lube.....I've been using Lyman's case Lub with excellent success. I'm told that Hornady's "one shot" is fine too and I assume others have a fine lube. I did use a product that seemed like spraying SAE 90 and it wasn't good at all.

I'm a big believer in the spray for lubing cases

RE: Ingenuity: resizing lube pad??
 

Like Gunfighter said a pad is only a few dollars and will last for a long time . I use spray lube too but prefer the pad myself.

[Deleted]
 

[Deleted by Admins]

RE: Ingenuity: resizing lube pad??
 

Why use a lube pad? Try Imperial sizing die wax and you will forget about using lube pads.

Rem. 222

RE: Ingenuity: resizing lube pad??
 

Get a tub of Hornady case lube and apply with your fingers,I have been using this tub for over 2 yrs,I reload a lot and there is still not much missing.Should last a very long time for about $3 bucks

http://www.hunting-pictures.com/memb...ght&encore.jpg