Reloading Belted Magnums
 

I going to start reloading for my 7mm magnum and was wondering how many times you guys are getting out of your belted cases and the best methods to go about it. I'm not going to be loading them hot, just moderate loads. Are you full length or neck sizing them? Which would be best for me? I'll be hunting whitetail with the gun which is a bolt-action model 70 winchester. I have never reloaded a belted case before, just my .308 win which I full length resize for a lever action rifle. Any help is much appreciated.

Thanks,
Sean

RE: Reloading Belted Magnums
 

I like to paritial FL or usea lee collet. That way, brass is being centered by the shoulder and not the belt.

RE: Reloading Belted Magnums
 

For most of my reloads, I size them only that amount required for the neck to properly grip the new bullet-(here I'm talking about cases that were alreadyfired in your rifle, and will go back into the chamber w/o any sizing at all). It only requires sizing about one bullet diameter from the mouth,(.28" to .30" of the neck).

What you must avoid doingis shoving the shoulder back when sizing, because if you do, it will move forward again when fired. And this amount of working the brass will cause early head separations, just like with a rimmed case such as the .303 British....

RE: Reloading Belted Magnums
 

I neck size only using the Lee collet neck die. I love it because it makes very straight ammo, works the brass less and requires no lube.If thecases grow enough that chambering becomes a problem I use a Redding body die to bump the shoulder back slightly. Don't really know how may reloadings I could get with this method. I usually toss my brass and buy new before they fail.

RE: Reloading Belted Magnums
 

Thanks for the help guys, I think I'll pick up a set of Lee Deluxe dies with the collet neck sizing die, full-length sizing die, and bullet seating die.

RE: Reloading Belted Magnums
 

I neck size them only with the RCBS neck sizer. When they start to get tight, then I'll full length size them. As for the case life issue, I was still reloading Browning and Imperial cases after 15 years. I anneal my brass when necks start cracking, and they last for a long time. My loads are at the top end of the spectrum, and the accuracy of a neck sized case over a full length sized case is phenominal. Loading a belted case is no different than a non belted case, other than the fact thatyou are adding a lot more powder, and usually a heavier bullet than the magnum's standard counterpart.

RE: Reloading Belted Magnums
 

If I am on a high dollar hunt, or hunting something that could try to eat me; I would want to go afield with belted magnum loads based on new or once fired brass.

RE: Reloading Belted Magnums
 

yep I neck size for practice reloads, I use mild loads and use cases untilthey fail sight inspection. I use new brassforhunting.