Reloading .35 Whelen
 

In trying to find loading data for the .35 Whelen, I have come up against a wall. Does anyone know what manuals has a decent listing
for this calber? Only one older manual (Speer) has a listing For this caliber. Hate to buy a manual only to find no listing. There have been newer powders out now that aren't in this book. (7th. Edition, 1966).

RE: Reloading .35 Whelen
 

Hodgdon #27 Manual has data for the 35 Whelen.
Good luck

RE: Reloading .35 Whelen
 

Should have mentioned this before.
Have you tried the differant powder web sights?
They will usually tell you if they have the info.

RE: Reloading .35 Whelen
 

"Nosler Reloading Guide Number Four", "Speer Reloading Rifle & Pistol Manual Number 12", "Hornady Handbook Of Cartridge Reloading Fifth Edition", "Barnes Bullets Reloading Manual Number One", plus many more. Good luck.

RE: Reloading .35 Whelen
 

...plus, you can start a topic here, or over at www.shooters.com on their talk site, on the rifle reloading page.. there are LOTS of Whelen shooters over there that can give you good loads for any bullet weight you want to shoot... including cast bullets. There's lots of info out there.... but if you want a manual, then go with one of the ones that handloader1 mentioned... also the Lyman manual has some data, I believe. Any specific questions about bullet/powder? I've only been loading mine for about 6 months now, but maybe I can help some..

"Progress, far from consisting in change, depends on retentiveness..those who cannot remember the past are condemned to repeat it." Santayana

RE: Reloading .35 Whelen
 

Many thanks to all of you. I might ago with the Hornady manual, as it is their bullets that I have been using. Hornetguy; I might mention I was looking for a load for H335 in 170gr. and 200gr. both spitzers. Hodgdon has a load listed for the 200gr. RN. (55gr.) Got my Rem. 700 custom in '88 when it first come out. Gonna check out that site.
Thanks again.

RE: Reloading .35 Whelen
 

try hornady 4th edition ,volume#1, page 424 .