HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   need help loading 22-250 (https://www.huntingnet.com/forum/reloading/161083-need-help-loading-22-250-a.html)

fishead 10-22-2006 11:14 AM

need help loading 22-250
 
I am getting desprate trying to find a very accurate load for my new win 22-250 coyote, its got about 75 rds through it and I can't seem to get a sub 1 1/2 group at 100yds I tried varget, RL15, with hornady vmax and rem sp, 55 gr bullets and played with the seating some. at around 3600fps. It shoots new win 45 gr jhp better thease are going around 3800-3900 fps, I also have the med heavy barel. thanks for any help,

Soilarch 10-22-2006 11:43 AM

RE: need help loading 22-250
 
My 700 likes the white-box win too. I made a huge mistake when I first started reloading for 22-250. I thought that once fired shells didn't need to have the cases trimmed back. If you're doing the same consider yourself lucky to get 1.5" and lucky that you still have a gun in one piece. The 22-250 is generally a pretty darn forgiving reloaders cartridge so I don't know what it could be besides something in case prep. I still haven't had luck with 60gr partitions, but that's likely because I've only tried one powder and the partitions are probably just too long for my guns 1-14" twist. There are alot of more knowledgeable guys on here, they'll be able to point out other problem areas with the 22-250. Good luck

mounting man 10-22-2006 02:15 PM

RE: need help loading 22-250
 
In the last 10 years,I've had the best luck with IMR4064,in the 22-250.Also,the Remington bullets are not going to group much better than what you have gotten!!!!Try Hornady 55 V max and see what happens?

#40Fan 10-22-2006 07:39 PM

RE: need help loading 22-250
 
35 Gr of RL-15 with your 55 gr bullets. This is a pretty light pressure load, but be careful.

I would start with them seated .010" off of the lands.

Coleridge 10-23-2006 05:58 AM

RE: need help loading 22-250
 
Hard to beet 38gr of H380 behind a 55gr bullet! I've got 2 Rem 22-250's & that's the best load in both.

Hairtrigger 10-23-2006 04:30 PM

RE: need help loading 22-250
 
Are you cleaning the barrel often? a new barrel can be rough and hold copper quickly

Rebel Hog 10-23-2006 05:39 PM

RE: need help loading 22-250
 
Rifle Reloading Data, Hodgdon Powder Co., Inc., The Brand

gene62 10-23-2006 10:32 PM

RE: need help loading 22-250
 
Fishead when you say 22-250 coyote are you talking about a
winchester coyote? I have the coyote lite in 22-250 and it loves 50-55grn
and varget. It shoots the Barnes 53 trx real well but they are a little$$$

Deleted User 10-24-2006 01:56 AM

[Deleted]
 
[Deleted by Admins]

eldeguello 10-24-2006 06:46 AM

RE: need help loading 22-250
 

ORIGINAL: fishead

I am getting desprate trying to find a very accurate load for my new win 22-250 coyote, its got about 75 rds through it and I can't seem to get a sub 1 1/2 group at 100yds I tried varget, RL15, with hornady vmax and rem sp, 55 gr bullets and played with the seating some. at around 3600fps. It shoots new win 45 gr jhp better thease are going around 3800-3900 fps, I also have the med heavy barel. thanks for any help,
You might try polishing the bore well with J-B Paste after a good cleaning, and also 45 or 50 grain bullets might shoot better than 55 grain or heavier slugs in that 1/14" twist......


All times are GMT -8. The time now is 04:32 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.