HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   204 ruger loads? (https://www.huntingnet.com/forum/reloading/148770-204-ruger-loads.html)

clayshooter 07-21-2006 07:51 PM

204 ruger loads?
 
I have a Savage 12 in .204 Ruger. I have loaded BL-C2 with marginal results. I am looking to load another powder that is more consistant. I can get groups sub 1/2 moa and then I can get a 2+ with the same reloads. I know it is not all "Operator Error"

My question is what ae you all loading for the 204? I am long on Varget and H380 right now. Any recipe's would be great. Ryan

HighDesertWolf 07-21-2006 08:32 PM

RE: 204 ruger loads?
 
BL-C2 is a very consistant powder, I would look over other possibilities before ruling out the powder. just to give some ideas check over the gun, loose scope mounts loose stock screws etc. another thing is you obviously have a good load if its shooting sub 1/2 moa if the powder was truly inconsistant then I could see little variences from 1/2 moa to 1 or maybe a little over a moa. but as high as 2+ Id have to say its alot more operator error then the equipment or let alone the powder. after checking everything over and try shooting from a solid rest then maybe you can start ruling out ammo components. good luck

trailer 07-22-2006 06:15 AM

RE: 204 ruger loads?
 
Do you let the barrel cool down when shooting groups..?

clayshooter 07-22-2006 05:57 PM

RE: 204 ruger loads?
 
I tend to shoot fast. I know that the barrel is not hot hot, and if it is getting to much variation from the speed I am shooting, it won't be good for my intended uses. I chose the BL powder b/c it metered well in my meter. I have/had no other reason to use it. I now have a chargemaster 1500 and am comfortable with using any powder as they all work well in the machine. I know that some of the group work is op error, but I shot a 3 shot group with 40gr Hornady's that was one ragged hole yesterday. Unfortunately, I got called away from the range with out getting to shoot more than one group with that rifle.

clayshooter 07-23-2006 09:37 PM

RE: 204 ruger loads?
 
On the recomendation of, of all people, the guy at the gun show today selling powder, I got some H335 to try. Anyone use this for 204 or 223?

usmc rifleman 08-02-2006 02:59 PM

RE: 204 ruger loads?
 
try 28.0 gr of H335 with a CCi brench rest primer i have a Savage 10fxp3 with a BSA 8-32x44 it shoot 4185fps thru my chrono and .162 group of 3 @100 yards


All times are GMT -8. The time now is 08:04 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.