25-06 Deer Loads
02-01-2006, 06:37 AM
#2
Nontypical Buck
Join Date: Oct 2005
Location: Berkeley Springs, WV
Posts: 1,293
RE: 25-06 Deer Loads
I use 54grrns Rel 19 with 100grn Nos B.T. My Encore loves the load. Under 1" groups very consistanly most times I get a nice cloverleaf group.
I have also had alot of luck with 45grns IMR 3031 shot really good groups with it also.
These loads are near max so take the normal precautions.
I have also had alot of luck with 45grns IMR 3031 shot really good groups with it also.
These loads are near max so take the normal precautions.
02-01-2006, 06:27 PM
#7
Spike
Thread Starter
Join Date: Jan 2006
Location:
Posts: 48
RE: 25-06 Deer Loads
I want to thank everybody for the info. on 25-06 deer loads. This will give me a great start when I start reloading for the upcoming deer season. The last 2 years I have been using factory remington loads. THANK YOU!!!!!!!!!!
02-02-2006, 06:47 PM
#8
Giant Nontypical
Join Date: Jan 2004
Location: a van down by the river
Posts: 8,939
RE: 25-06 Deer Loads
I'm still working on my Accubond formulation. I hope to test some more this weekend. I'm also trying to work up some loads for some Barnes Triple Shocks because shocking them twice just isn't enough.
02-03-2006, 04:56 PM
#9
Join Date: Feb 2003
Location: ludington michigan USA
Posts: 280
RE: 25-06 Deer Loads
When I started loading for the 110gr accubond I thought I would start with 115gr bt loads and work up slightly. I haven't been able to increase powder at all. I read that the accubonds use a harder jacket material than the ballistic tips. That may be the reason.
Thread
Thread Starter
Forum
Replies
Last Post
IndyHunter83
Black Powder
53
11-05-2009 07:31 AM
