HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Reloading (https://www.huntingnet.com/forum/reloading-15/)
-   -   .25 Cal Nosler Accubond Load Data needed!!! (https://www.huntingnet.com/forum/reloading/127876-25-cal-nosler-accubond-load-data-needed.html)

monarchoutdoors 01-06-2006 08:18 AM

.25 Cal Nosler Accubond Load Data needed!!!
 
Has anyone loaded the 110 gr accubond bullet in the .257 wby mag. I need some starting points and some load data. Thanks in advance

Roskoe 01-06-2006 11:46 AM

RE: .25 Cal Nosler Accubond Load Data needed!!!
 
I developed some loads for this bullet in the .25-06 Ackley Improved, which is a caliber of similar performance to the .257 Weatherby. Using the same charges as the 117 gr. Sierra worked about pretty well for me. I hesitate to give you a specific maximum load, but I would use RL22 or H4831SC and start out where the book says to start with the 117 Sierra. You also might contact Nosler, either by phone or e-mail, for their suggested starting loads. Good luck. Roskoe.

PS - this bullet is turning out to be one of the best all around performers I have ever used at these velocities.

300winnie 01-06-2006 01:03 PM

RE: .25 Cal Nosler Accubond Load Data needed!!!
 
http://noslerreloading.com/phpbb2/viewtopic.php?t=1068&highlight=

I asked the same question a while back and although I asked about IMR 4831 specifically, the information they quoted me is right out of the Nosler Reloading Guide #4 for 120 grain bullets.

I would start with that data, or the 115 grain data and work up.



monarchoutdoors 01-07-2006 04:40 PM

RE: .25 Cal Nosler Accubond Load Data needed!!!
 
Thanks to all who replied. I will certainly give ita try. Thanks again and shoot straight


All times are GMT -8. The time now is 04:38 AM.


Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.