4064 FOR 300 WSM ?
 

Wondering if anyone has ever worked up a load using 4064 for the 300 wsm?Can't find any info for using 4064.I also use imr 4350 with good results,just wondering if I can use the 4064.Thanks

RE: 4064 FOR 300 WSM ?
 

Sure you can, don't expect much performance. Stay with RL19, IMR4350

RE: 4064 FOR 300 WSM ?
 

Sierra has load data using IMR 4064 for the 300WSM in thelighter bullets 110 to 150gr. Steve's pages has data for just about any thing you need.

http://stevespages.com/308_31.html

RE: 4064 FOR 300 WSM ?
 

THANKS,
ALSO AM WONDERING IF I CAN USE REGULAR WLR PRIMERS FOR MY LOADS,OR IF I SHOULD GO UP TO THE WLRM PRIMERS?I WILL BE RELOADING THE 300 WSM IN 165 & 180 GR.HORNADY INTERBOND.

RE: 4064 FOR 300 WSM ?
 

All data from Sierra lists Mag primers. I use Fed 215 and WLRM in my 300WSM.

RE: 4064 FOR 300 WSM ?
 

I have used standard primers in my 300RUM before. All it should do is lower the pressure. Might help or hurt accuracy. I know it helped my accuracy with 150gr 300RUM IMR4350 combos.

RE: 4064 FOR 300 WSM ?
 

THANKS AGAIN,ALWAYS CAN COUNT ON SOMEBODY I HERE TO HAVE THE ANSWERS.CAN'T SEEM TO FIND ANY DATA ON USING THE STANDARD PRIMERS,BUT SINCE I HAVE THEM I'M GOING TO WORK UP A FEW LOADS AND TRY THEM.

RE: 4064 FOR 300 WSM ?
 

I've been getting good results using H4831sc in my 270 wsm. I imagine it would work well with the 300 as well.