Shotgun shell reloading
 

Decided to start loading my own shotgun shells. Been loading rifle for many years, but need to expand my reloading horizons.

I'm having a tough time finding accurate info on reloading shotshells. I will be doing 2 3/4 to 3 1/2 loads. The 3 1/2 being mainly steel shot.

Anyone have a good website or personal information in regards to type of loads, the types of items used in those loads (wads, powder,shot, primers), etc...

Appreciate your input.

Robert

RE: Shotgun shell reloading
 

for 2 3/4 trap loads and other lead loads go to www.hodgdon.com
www.imrpowder.com

www.alliantpowder.com


but for steel shot visit the folks at
www.ballisticproducts.com

RE: Shotgun shell reloading
 

as far as components go, you opened up a can-o-worms there, bro...

I use AA hulls for my skeet & trap loads, and actually those black lowbrass Remington "Game Load" hulls for my field loads...

now, when you look in a reloading manual, you have to match the wad to the hull... most manuals will say something like "AA hull, WW wad # blah blah "white", 1oz lead shot, 7.3 gr IMR 700x MEC bushing #23 or someting like that...

so make sure you match your stuff up for good results...

I thought of buying an adjustable charge bar for my MEC, but bushings are cheap in comparison

RE: Shotgun shell reloading
 

Thanks Razorhead and Vapodog. Will check the sites out as well as remember the info you stated.

Again, thanks!!

Robert

RE: Shotgun shell reloading
 

Some of the shotshell reloading books(extensive ones) will have a lot of different loads,and one can use the same plastic wad for all. Check around,and you can find some,somewhat universal wads so you won,t have to change wads,nitro cards,ect all the time.Lyman puts out a r eal good book and so does that ballistic products that vapodog has mentioned. vangunsmith

RE: Shotgun shell reloading
 

Best place on the web for steel shot reloading is http://www.sgcato.comthat I have found.
Have to sign up ( free , and easy) to read the posts .
A great group of guys .

If you are going to load 3 1/2" steel shot shells .
I would buy the MEC 3 1/2" Steel Master and the short kit so you can load 2 3/4 and 3 "

Plcces to buy Steel reloading stuff
http://www.bucksrunsports.com/orders are over the phone, They sell RSI components , faster speeds and lower presures
http://www.grafs.com/They sell Ballistic products
http://www.precisionreloading.com/ They sell their own wads and some of the stuff Ballistic Products sell , but cheaper

Johnch

RE: Shotgun shell reloading
 

The Lyman 4th Edition Shotshell Manual has a wealth of information on reloading everything but steel shot. I would reccomend it to anyone loading shotshells. They might have a newer manual out by now, it's been a few years since I purchased mine.