BARNES TRIPLE SHOCK LOADING DATA!!
I was wondering of anyone has any loading data for the Barnes Triple Shock in the .257 Weatherby Mag. Thanks in Advance
|
RE: BARNES TRIPLE SHOCK LOADING DATA!!
The barnes web site gives the directions for loading the triple shocks. www.barnesbullets.com
|
RE: BARNES TRIPLE SHOCK LOADING DATA!!
Thank You but I have been reloading Barnes for awhile use thier manual often. I also have contacted thier techs by phone. I was looking for a load than someone else has developed to be a tack driver and to see if they are willing to share it. Thanks again
|
RE: BARNES TRIPLE SHOCK LOADING DATA!!
You might want to try out www.loaddata.com its a real good sight. vangunsmith
|
RE: BARNES TRIPLE SHOCK LOADING DATA!!
From my barnes manual with 100 and 115 XFP and XBT. They say you can go another 1 or 2 grains over this data safely. I have confirmed this with my 300RUM. But thats alot of more powder, and I would be much more careful watching for pressure signes with this load since 1 or 2 grains percentage wise is much more..
100gr RL19 64-69gr RL22 67-72gr (recommended powder) H4350 57-62gr H4831 63-68gr H1000 71-76gr (recommended powder) IMR4831 61-66gr IMR7828 65-70 115gr AA3100 61-66gr RL22 64-69gr (recommended powder) H4831 61-66gr H1000 68-73gr IMR4831 59-54gr IMR7828 63-68gr |
RE: BARNES TRIPLE SHOCK LOADING DATA!!
Thanks again for the in put. I have to say that I like the stocks on the SuB Moa in the tan with black web. I have found a good load. 64 gr H4831 Fed 215m
all touching at 100 yards with 100 gr scirocco or ballistic tips. Thanks again any more is appreciated |
All times are GMT -8. The time now is 11:22 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.