ID this scope mount please?
 

Not crazy with this mount but will live with it till I can get to Williams again.



rear post.


front post.



Thanks
:) Al

RE: ID this scope mount please?
 

it might be a Millet... check some of their sites. It kind of looks like one.

RE: ID this scope mount please?
 

Yooper

It sure looks like a Leupold to me - but Burris did make some that look like a Leupold...

It really does not look like the set that should go on a short action Rem 700. This is the one that I use

http://www.swfa.com/pc-3163-401-leupold-standard-1-piece-base.aspx

This the 2 piece set for a Rem 700...

http://www.swfa.com/pc-3038-402-leupold-standard-2-piece-base.aspx

It really looks like somebody just picked a set of bases of the rack that would fit the pre-drilled holes on the rifle. Actually it looks like they on backwards also.

Just guessing

RE: ID this scope mount please?
 

I'd say it's Leupold.

RE: ID this scope mount please?
 

looks like a leupold.

RE: ID this scope mount please?
 

I have this on my Savage ML-II . It is Leupold. I lapped (then blued) my rings so everything lings up. You can remove one screw then twist the scope and it comes right off. I have only had mine a month but seems to worl well.

RE: ID this scope mount please?
 

Leupold, That makes sence to me. Bet they were bought at Williams and off the rack not by a sales person as they seem to push the Williams mounts when I ask them.
:DFunny story, about Cabelas sales help. ;)My wife got me my Remington 700 ss ML for Christmas. We went to the daughters in Minnesotafor the week between Christmas and New years . I asked the son in law if he wanted to go to Cabelas in Albert Lea as I wanted to buy a scope and mounts for the new ML.
We got there, I was in aw as I had never been in a Cabelas store before. Found the area with scopes looked at a lot and decided I wantewr the Bushnell Trophy in silver. Asked about mounts and the guy asked what make &model rifle I wanted them for. I said a Remington 700 ML. He said I had to go to the black powder area for that rifle. They in turn looked at me like I was some kind of nut case. They told me that all the mounts were sold in the scope area. I went back there and the same person said mounts for any black powder rifle was indeed sold in the Muzzle Loading area.
I just bough the scope as I didn't care for the run around I got from them.
I got the mounts from Williams as soon as I got home. No fuss No muss.
The guy at the Rodgers Minnesota store a few years latter Knew just what I wanted when I asked about the 209 kit for it.

Thanks for ID.
:) Al

RE: ID this scope mount please?
 

I don't like the spacing on that mounting system. You could remove the scope and flip one or both of those bases around. But that is a good system.

RE: ID this scope mount please?
 

Look like Leupold or Redfield.
Also looks like one of them needs to be reversed. ;)

RE: ID this scope mount please?
 

i think the front one is a turn in system with no hold down screw. the rear mount is held in by the screw cutting into the mount. i dont like that system because if you take it apart the grooves that are cut can get messy.

RE: ID this scope mount please?
 

Like I said above they will do till I get to Williams again.
I don't know if they are on back wards or not as they were on the rifle when I bought it. I just know that the fouling the scope gets on my 54 is stopped by the mounts on the 50. A real crappy place to get into and clean good too.
I have always used the Weaver mounts till I bought my first set of Williams mounts.

:)Al

RE: ID this scope mount please?
 

It is definitely a Redfield style mount. You need to reverse the bases, you have them too close together. The only problem with that style is you definitely need to lap the rings. I would not use that type of ring without first lapping the rings. The system is very strong. Tom.

RE: ID this scope mount please?
 

"I would not use that type of ring without first lapping the rings. The system is very strong. Tom."

Bingo!!!


Those are Leupoldbases. Judging from their rough look they are the made in China model. I install a lot of scopes for folks and have had nothing but trouble withmade in China rings andbases. It is possible to find Leupoldrings and bases that are made in the USA.

Made in China rings and bases:

Leupold-some
Simmons-all
Weaver-some

RE: ID this scope mount please?
 

look like old style redfield rings to me.