HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Official IBO.Net Forum - 3-D Shooting (https://www.huntingnet.com/forum/official-ibo-net-forum-3-d-shooting-24/)
-   -   arrows/speed /poundage (https://www.huntingnet.com/forum/official-ibo-net-forum-3-d-shooting/52123-arrows-speed-poundage.html)

buddy44403 02-14-2004 09:36 PM

RE: arrows/speed /poundage
 
Hey pup,I shoot vapor 23 speeds. They are light and fat. I'm shooting 54lb's, 30" draw, 80 gr. points, 28 1/2" arrows and I'm getting 270 fps.
I hope that helps.

Elkcrazy8 02-14-2004 09:50 PM

RE: arrows/speed /poundage
 
I shoot the A/C/C 3-60. They might be a little on the heavy side for you. You could go to prbably the 3-39's and get just a little above the grn weight that you are shooting depending on your length and tip weight. Make sure that your foward of center is correct though, whatever you may choose for an arrow. Get it too far back and you will have an unstable arrow. Get it too far foward and it will nose dive. I like to keep mine between 7-9 for shooting 3-D. As far as line cutters, if you shoot good enough you won't need them. Just remember that you will have more surface area for a side wind to catch. You need to weigh out your options and find out what will work in most cases. Playing the odds can pay dividends in the long run. Get your gear set up and gain confidence in your equipment. As far as yardage, I spend at least 3x a week practicing. I have calculated my bows drop up to 50 yrds. I will estimate the range of an object and then shoot it with my rangefinder. All the info is written down and then entered into my computer. I can then calculate what my score would have been if I made the perfect shot. With this scoring system I can find out if I am improving or not. I am able to tell where my problem yardages are and work on those the most. With more confidence you can see the shot actually happening. Meaning it will more likely happen. If your confidence is low and you see yourself missing. Then you probably will. Last but not least. Shoot small. Pick a blemish on the target or maybe a shadow, Shoot for those spots and if you miss. Then you will more than likely miss small. See the target as the spot and not the whole 3-D target. Good luck in your shoots.

pup 02-14-2004 10:08 PM

RE: arrows/speed /poundage
 
yeah i shoot every day when there isnt 3 feet of snow on the ground. when you guys judge your yardage how close can you get and how close do you try to get? usually i can be within a yard or 2 but i was talking to this guy once who when he looks at a target hes like thats 27 yard 1/4 yards i thought that was crazy

White Raven 02-15-2004 05:06 AM

RE: arrows/speed /poundage
 
Good post. S

White Raven 02-15-2004 05:07 AM

RE: arrows/speed /poundage
 
Good post. S

pup 02-16-2004 05:44 PM

RE: arrows/speed /poundage
 
whats with white raven

pup 02-16-2004 05:56 PM

RE: arrows/speed /poundage
 
so all you guys that shoot acc's are they very strong? im known to be a little hard on arrows. also have any of you shot the larry wise pro arrows? http://www.larrywise.com/arrows/

Elkcrazy8 02-16-2004 09:35 PM

RE: arrows/speed /poundage
 
The ACC arrows are tough. They are hard to robinhood. I have blown the nocks off of many of mine and they are still shooting. I was really surprised when I switched to them and found that they were as durable as they are. The uni bushing and the G-nocks are a good system.

pup 02-17-2004 12:29 AM

RE: arrows/speed /poundage
 
From all i have been hearing about the acc's i think thats what im leaning to right now. but my one concern with them is going to be weight do the easton charts tend to be over or under spined? i shoot 60 pounds with just under a 28 in arrow what size would i need?

CENTER PUNCH 02-26-2004 07:25 PM

RE: arrows/speed /poundage
 
I shoot a Hoyt Ultra Tec at 63 pounds, 30 inch draw, with a 332 grain carbon tech cheetah hunter and i am getting 304 to 305 fps. I agree with everyone else tune your bow and practice, practice, practice making a good shot and the score will follow.



KEEP EM IN THE X-RING


All times are GMT -8. The time now is 10:09 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.