Buy or build-it-myself tower stands, and, the choice utility ATV to hull it into the woods
 

Looking for the ideal tower stand for hunting deer, or, plans to build the ideal one myself, will have to assemble itin the woods in deep east Texas. Also, any ideas for a feeder, planon feedingall year.And, while I'm at it, looking for the choice utility ATV to hull this deer stand into the woods. Would appreciate your experinces and your choice.

Thanks in advance!!

RE: Buy or build-it-myself tower stands, and, the choice utility ATV to hull it into the woods
 

Beachbumintx, I built this tower stand in 2005 and it worked very well. It's made of 4x4 treated post for the tower with 1x2's for the lateral braces. The box is made out of 1/2 inch plywood cut 42 inches wide by 7 foot front and 6 foot back panelsand screwed to 2x2's (ripped 2x4's) untreated. Thethreesides are screwed together and then the top set on and then the front is screwed and finally the top is screwed down. Plywood roof with tin on top. Cut out window openings and hinged with deer hide. Around $250 for all the materals you see here. One heck of a stand and very warm in the winter. I have added 3/16th steel guy wire to three sides and staked to the ground just to be sure and withstand the summer thunder storms and wind. You wouldn't want this stand to blow over. LOL. Hope this helps.

RE: Buy or build-it-myself tower stands, and, the choice utility ATV to hull it into the woods
 

And another view.

RE: Buy or build-it-myself tower stands, and, the choice utility ATV to hull it into the woods
 

Thanks Buddy, I appreciate your info!!

RE: Buy or build-it-myself tower stands, and, the choice utility ATV to hull it into the woods
 

I have a tower stand I would sell you, it has a metal tower "galvanized with a galvanized roof and is in good shape. think the tower is 10' and the stand is 5x5x7 if you areinterested e-mail me and I will take pictures and get the exact dim for you, oh and the sides are masonite siding.