barrel difference
Is there a difference in barrel configuration between a Win 94 top eject and a 94 angle eject? In other words, are the barrels interchangable?
|
No, the barrels are not interchangeable. The tenons are the same, EXCEPT the extractor cut is at 12o’clock on 94 (top eject) and at about 1:30 on the 94AE.
Individual rifles will also have individual tenon dimensions, so pulling a barrel from one may not time correctly (rotational alignment when the shoulder meets the receiver) when installed on another receiver. |
Originally Posted by Nomercy448
(Post 4405659)
No, the barrels are not interchangeable. The tenons are the same, EXCEPT the extractor cut is at 12o’clock on 94 (top eject) and at about 1:30 on the 94AE.
Individual rifles will also have individual tenon dimensions, so pulling a barrel from one may not time correctly (rotational alignment when the shoulder meets the receiver) when installed on another receiver. |
All times are GMT -8. The time now is 02:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.