Forums Forums (
-   Gunsmithing (
-   -   Re-chamber/re-barrel a .270 win (

pa257 12-18-2015 11:38 AM

Re-chamber/re-barrel a .270 win
The first rifle I bought was a used Ruger m77 tang safety in .270 win, but the rifle has an 18"barrel and is really an unpleasant gun to shoot and now redundant. On the plus side, the rifle has a nice laminated stock and is easy to carry (read: light). I'm thinking of re-chambering the gun and since I have a .257 roberts and a 7mm weatherby mag I'm looking at something in a .30 cal, e.g 30.06. Any other recommendations? I was going to have Pac-nor re-chamber and re-barrel the gun but if anyone has any other recommendations, I'm all ears. Thanks.


Big Uncle 12-18-2015 02:17 PM

Nothing wrong with a .30-06 but if you want more of a thumper it would be easy to rebarrel it in either a 35 Whelen or a 9.3 x 62. These two are nearly identical for most purposes. The 9.3 is an old cartridge that is very popular in Europe and also in some parts of Africa. U.S. shooters have noticed the 9.3 and it is becoming more popular here.

jeepkid 12-18-2015 02:51 PM

Keep it a .270 win...

bpd1982 12-19-2015 09:13 AM

If you are a handloader I would say a 338-06 would be a nice addition.

buffybr 12-19-2015 09:48 AM

If your 18" barrel in unpleasant to shoot as a .270, it would be VERY unpleasant to shoot in .30-06 or anything larger.

bronko22000 12-19-2015 10:06 AM

By what you mean unpleasant to shoot and you're referring to recoil then anything larger than a 270 will recoil more. Ain't nothing wrong with rebarreling to a 30-06. But it is going to thump your shoulder a bit more than the .270.

pa257 12-19-2015 01:46 PM

Thanks for the replies! By unpleasant I mean it has a sharp recoil. Probably due to the stock design and light weight but I don't mind shooting my 3" mags or my 7 mm mag but this .270 (which shouldn't be that bad) is really not fun to shoot, like yanking nose hairs.

Another question I have is: do I have to keep the same profile barrel? I like the stock but if I have to keep the short sporter barrel, maybe I'll just sell it and build a custom rifle. Though I may be looking for wife #3 if I do that, jk, my wife is incredibly tolerant of my whims and general nonsense.

If I were to go custom, what would you build (based on me already owning a .25 and 7mm)? Wildcats allowed. I was thinking of having a .300 wsm built, light weight with a brake. Thanks again.

I'l try to post a pic of the gun so you can have a better idea of the profile.

Ridge Runner 12-19-2015 03:24 PM

what do you want it to do?

jeepkid 12-19-2015 03:49 PM

If you think the 270 kicks then don't mess with a 300 wsm...I had a short Ruger in 300 wsm for a while, I think I shot it twice, that was enough for me lol

pa257 12-19-2015 04:29 PM

Originally Posted by Ridge Runner (Post 4234441)
what do you want it to do?

That's a good question.

I guess I would want it to:

1. Shoot as accurately as possible

2. Be able to cleanly kill most N. American game minus big brown bears.

3. A gun that will do most of it's duty in NE Pa but able to travel out west here or there for elk/mulies/moose etc.

All times are GMT -8. The time now is 05:30 AM.

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.