Re-chamber/re-barrel a .270 win
#1
Fork Horn
Thread Starter
Join Date: Nov 2003
Posts: 138
Re-chamber/re-barrel a .270 win
The first rifle I bought was a used Ruger m77 tang safety in .270 win, but the rifle has an 18"barrel and is really an unpleasant gun to shoot and now redundant. On the plus side, the rifle has a nice laminated stock and is easy to carry (read: light). I'm thinking of re-chambering the gun and since I have a .257 roberts and a 7mm weatherby mag I'm looking at something in a .30 cal, e.g 30.06. Any other recommendations? I was going to have Pac-nor re-chamber and re-barrel the gun but if anyone has any other recommendations, I'm all ears. Thanks.
Tom
Tom
#2
Nothing wrong with a .30-06 but if you want more of a thumper it would be easy to rebarrel it in either a 35 Whelen or a 9.3 x 62. These two are nearly identical for most purposes. The 9.3 is an old cartridge that is very popular in Europe and also in some parts of Africa. U.S. shooters have noticed the 9.3 and it is becoming more popular here.
#6
By what you mean unpleasant to shoot and you're referring to recoil then anything larger than a 270 will recoil more. Ain't nothing wrong with rebarreling to a 30-06. But it is going to thump your shoulder a bit more than the .270.
#7
Fork Horn
Thread Starter
Join Date: Nov 2003
Posts: 138
Thanks for the replies! By unpleasant I mean it has a sharp recoil. Probably due to the stock design and light weight but I don't mind shooting my 3" mags or my 7 mm mag but this .270 (which shouldn't be that bad) is really not fun to shoot, like yanking nose hairs.
Another question I have is: do I have to keep the same profile barrel? I like the stock but if I have to keep the short sporter barrel, maybe I'll just sell it and build a custom rifle. Though I may be looking for wife #3 if I do that, jk, my wife is incredibly tolerant of my whims and general nonsense.
If I were to go custom, what would you build (based on me already owning a .25 and 7mm)? Wildcats allowed. I was thinking of having a .300 wsm built, light weight with a brake. Thanks again.
I'l try to post a pic of the gun so you can have a better idea of the profile.
Another question I have is: do I have to keep the same profile barrel? I like the stock but if I have to keep the short sporter barrel, maybe I'll just sell it and build a custom rifle. Though I may be looking for wife #3 if I do that, jk, my wife is incredibly tolerant of my whims and general nonsense.
If I were to go custom, what would you build (based on me already owning a .25 and 7mm)? Wildcats allowed. I was thinking of having a .300 wsm built, light weight with a brake. Thanks again.
I'l try to post a pic of the gun so you can have a better idea of the profile.
#10
Fork Horn
Thread Starter
Join Date: Nov 2003
Posts: 138
That's a good question.
I guess I would want it to:
1. Shoot as accurately as possible
2. Be able to cleanly kill most N. American game minus big brown bears.
3. A gun that will do most of it's duty in NE Pa but able to travel out west here or there for elk/mulies/moose etc.
I guess I would want it to:
1. Shoot as accurately as possible
2. Be able to cleanly kill most N. American game minus big brown bears.
3. A gun that will do most of it's duty in NE Pa but able to travel out west here or there for elk/mulies/moose etc.