HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Gunsmithing (https://www.huntingnet.com/forum/gunsmithing-115/)
-   -   Need your advice: rifle stock warped to "cast on" (https://www.huntingnet.com/forum/gunsmithing/337633-need-your-advice-rifle-stock-warped-cast.html)

Father Forkhorn 01-04-2011 06:59 AM

Need your advice: rifle stock warped to "cast on"
 
Is "cast on" in a rifle stock a good thing for a left hand shooter? I understand this might desireable for a shotgun. What about a rifle?

This gun is an old military surplus Turkish Mauser with the stock wrist slightly warped to a "cast on" position (in case my terminology is faulty, it is bent to the shooter's left as he looks down the barrel). I bought it a few weeks ago to tinker and learn some gun repair skills.

Should I leave the wrist where it is, or is it better to straighten the it? I'm a left hand shooter, and when I quickly shoulder the gun, the bend in the stock means my eye is looking right down the barrel. If it were a shotgun, I wouldn't have to move my head a bit to fire; the gun's exactly where it should be except for the height of the site. (that happens to be perfect when set at the 900 meter position).

I did notice that the foreend is bent left as well and the front sight is slid as far to the left as possible. I've not fired this gun as I am waiting on a headspace check but presume that the previous owner was trying to compensate for the stock. I'm presuming I'll have to work on the foreend eventually.

harter66 01-06-2011 09:07 AM

Finding a rifle that fits well much less for us lefties is pure luck . Id say do what it needs up front and leave the back end alone. You know if it was me/mine.

stalkingbear 01-06-2011 04:41 PM

It's going to be hard to straighten it at the wrist. I'd either replace the stock or knock down the comb to remove the cast on.


All times are GMT -8. The time now is 03:07 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.