HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Gunsmithing Projects & Techniques (https://www.huntingnet.com/forum/gunsmithing-projects-techniques-146/)
-   -   Restoring a Rusty Remington (https://www.huntingnet.com/forum/gunsmithing-projects-techniques/401780-restoring-rusty-remington.html)

TINCANBANDIT 10-01-2015 08:57 AM

Restoring a Rusty Remington
 
How is that for alliteration?

I have way too many shotguns and definitely wasn't looking for another one, but what can I say?

My Father in law picked this project up for me at a yard sale for $40.

It is a Remington model 58 12 gauge semi-auto, made in 1956, the walnut looks pretty good but the metal has pink rust spots.

anyway, here is what it looked like when he brought it to me:







TINCANBANDIT 10-01-2015 08:58 AM

Dis-assembly, the trigger group is removed just like any other Remington 870/1100, just push out the two pins.

The stock had two holes, one for the bolt and the other for???




In this picture you can see the action bar where it attaches to the piston (which is mounted in the front portion of the magazine, which is why the magazine only holds two rounds.





The trigger housing is aluminum and the finish looks horrible, since I have not tried anodizing yet and a polished housing would look good on this gun, I decided to strip and polish it



OK now what? I guess I need to take this mess of parts and make a working trigger mechanism out of them


TINCANBANDIT 10-01-2015 08:59 AM

While I was at it I polished some of the other parts



I also polished the bearing surfaces of the hammer




After much cursing, dis-assembly and reassembly I finally have a working trigger mechanism




now on to the steel

TINCANBANDIT 10-01-2015 08:59 AM

The next step was to remove the rust and old bluing using naval jelly



I then remove the remaining bluing along with the acid "etching" with the wire wheel on my grinder



Then we start removing the pits, starting with 120 grit emory cloth, then moving to 220 grit sand paper



I kept moving up on the grit until I got to 2000 grit (wet/dry) sand paper, the metal is almost ready for bluing




I then went to work on the barrel, there was a large rust pit on the magazine ring, I used a file to get it smooth again



then I sanded the barrel to 600 grit and used the buffer to make it shine, the black stuff on the metal is buffing compound



TINCANBANDIT 10-01-2015 09:00 AM

When I blue a gun, I do more than one, more economical that way





Done! I also jeweled the bolt and nitre blued the pins and charging handle









Before & After







you can see the whole story here: http://tincanbandit.blogspot.com/201...-model_10.html

Sheridan 10-01-2015 09:13 AM

Excellent work !!!

Thanks for posting !

Oldtimr 10-01-2015 09:31 AM

Nice job of restoration.

RPD63 10-01-2015 12:32 PM

Very nice job. Did you blue it yourself or have it done?

TINCANBANDIT 10-01-2015 01:07 PM


Originally Posted by RPD63 (Post 4221378)
Very nice job. Did you blue it yourself or have it done?

I blued it myself

super_hunt54 10-04-2015 09:03 PM

I liked the idea of polishing the crud off they used to "blue" that trigger guard and leaving it bare polished. Very nice detail.


All times are GMT -8. The time now is 11:44 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.