HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   sticky bolt ~ HELP (https://www.huntingnet.com/forum/guns/66868-sticky-bolt-help.html)

Sure Shot 2009 07-22-2004 03:08 PM

sticky bolt ~ HELP
 
the bolt on my ruger markII M77 .223 is really hard to work. only when pushing the bolt all the way down or lifting it up though. i have to hit it pretty hard to make it work. maybe its the ammo though because its just been hard to work since ive started shooting WOLF 55gr but the bolt worked fine when i was using winchester or remington ammo. i found some of my other ammo around and the bolt worked fine with it, just seems to be the Wolf ammo causing the problem.....any suggestions or any advise on how to fix it???

THANKS

bigcountry 07-22-2004 03:29 PM

RE: sticky bolt ~ HELP
 
Yea, don't shoot Wolf. Your headspace might be a little on the tight side for that ammo. If your concerned, have a gunsmith put a no go gauge in to see what you headspace looks like.

johnch 07-22-2004 06:18 PM

RE: sticky bolt ~ HELP
 
If one type of ammo/brand is causing a "sticky" bolt STO shooting it . Either high pressure or case expantion ,don't think steel cases expand mutch.

Sure Shot 2009 07-22-2004 08:45 PM

RE: sticky bolt ~ HELP
 
dang i was hoping you guys wouldnt say that.......i have about 700 rounds in wolf.....DARN...........ill have it looked at or somethin........have a neighbor works on guns ill have him look at it

UncleNorby 07-23-2004 07:22 AM

RE: sticky bolt ~ HELP
 
I have heard that wolf ammo is coated with something, maybe lacquer? Anyway, i have heard it can really gum things up. Try cleaning the chamber with a solvent that will cut whatever that junk is, and see if you still have trouble. If so, I'd get rid of the crap. You could talk to some experienced folks here to figure out if there is a pressure issue.


All times are GMT -8. The time now is 01:06 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.