|
The original post is 15 years old.
|
I never seen where he posted what Winnie said or done to the S/Gun.
|
Originally Posted by Oldtimr
(Post 4371667)
The original post is 15 years old.
? I posted this last spring. |
Originally Posted by willy 9889
(Post 4371660)
I would suggest going to a gunsmith and have them change the cast and comb spacers till the gun fits you better.
that should at least solve the problem partially. My SX3s came with the extra spacers so Im assuming the SX4 does as well. Willy
Originally Posted by Nomercy448
(Post 4371664)
High right means you need to drop your comb and add some right handed cast (sway the buttstock to it’s own left).
I think that is a good next step. Thankyou. |
Originally Posted by DeerSlayer267
(Post 4355277)
I ended up calling winchester and they offered to take a look and let me send the gun in for free. It is brand new and some sort of special model that there is only around 600 manufactured so im not sure id find the perfect barrel type for it if i did that
|
sorry i totally forgot to check this. Yes i did. And they never told me what was wrong if anything so i thought nothing of it. thinking they fixed it or something. However when i did start shooting it again this winter i called and they informed me that last time it was out of spec and shooting high, but not to the right. So i sent it back because whatever they did mustve undone itself as it was still hitting the same. so that confirms that the POI was off from the factory.
|
| All times are GMT -8. The time now is 04:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.