Go Back  HuntingNet.com Forums > Firearms Forum > Guns
AR-15 for Whitetail, 5.56 muzzle energy ~= 30-30 >

AR-15 for Whitetail, 5.56 muzzle energy ~= 30-30

Community
Guns Like firearms themselves, there's a wide variety of opinions on what's the best gun.

AR-15 for Whitetail, 5.56 muzzle energy ~= 30-30

Thread Tools
 
Old 11-24-2013, 06:34 AM
  #1  
Spike
Thread Starter
 
Scout Actual's Avatar
 
Join Date: Nov 2013
Posts: 11
Question AR-15 for Whitetail, 5.56 muzzle energy ~= 30-30

I was reading about the 30-30 cartridge on Wikipedia and noticed that its muzzle energy is roughly equal to the 5.56 NATO at about 1,800 ft*lbs at the muzzle.
https://en.wikipedia.org/wiki/5.56%C3%9745mm_NATO
https://en.wikipedia.org/wiki/.30-30_Winchester

When people talk about an AR-15 for hunting they typically reference the ,223 Remington as the round being used (excluding 7.62 NATO, 300 AAC, etc). Now, since most AR-15's are chambered for the higher pressured 5.56 NATO round I see no reason why you couldn't plan to hunt with hunting bullet loaded to the higher 5.56 pressures.
https://en.wikipedia.org/wiki/.223_Remington

Obviously, the 30-30 is a well respected deer round. So, why arn't people discussing using a heavy for caliber round loaded to 5.56 NATO pressures to produce energies matching the 30-30 when talking about hunting with an AR-15? Why do I only see threads talking about the ~28% weaker .223 Remington loading?

What am I missing guys? Educate me.

EDIT: I was informed that my #1 mistake was I misread the muzzle energy of the 5.56 as ~100 ft*lbs when it is, in fact, 1800 JOULES which is about 1300 ft*lbs, right in line with the .223 (as one would expect). This basically eliminates the entire question/argument.

Last edited by Scout Actual; 11-25-2013 at 07:45 AM. Reason: Joules != Ft*Lbs!
Scout Actual is offline  
Old 11-24-2013, 06:53 AM
  #2  
Fork Horn
 
Join Date: Sep 2010
Posts: 468
Default

In some states a 223 can't be used for deer so check your state laws. I used a 222 for many years for deer. Never had one get away. Just don't use a varmit bullet for deer. You can buy bullets made for medium size game. Everybody has their own opinion on what caliber to use. I read about guys that think you should have a 30 cal or larger. Shot placement and distance is the key. If it is legal use it.
c-rad is offline  
Old 11-24-2013, 07:02 AM
  #3  
Spike
Thread Starter
 
Scout Actual's Avatar
 
Join Date: Nov 2013
Posts: 11
Default

Thanks for the info. It is legal here but my question is more academic than practical. I've got a .308 Bolt Action which is my primary and I recently picked up a Marlin 1895G in 45/70 that I want to take out... no one will complain of that one being too wimpy!

The question stems from the fact that there are many people feel the .223/5.56 isn't suitable for Medium Game. Very few people think the 30-30 isn't suitable for Medium Game. It appears as though the 5.56 muzzle energy is equal to the 30-30 and thus it seems that with the correct bullet you should be good to go. Trying to figure out my own opinion and am looking for information that would "disprove" my theory.
Scout Actual is offline  
Old 11-24-2013, 07:17 AM
  #4  
Spike
Thread Starter
 
Scout Actual's Avatar
 
Join Date: Nov 2013
Posts: 11
Default

I just got done with this Chuck Hawks article on .22 caliber cartridges for big game
http://www.chuckhawk..._cartridges.htm


It was very informative and doesn't bode well for my theory as the bulk of it discussed a .22 caliber round on a case designed for more powder than the .223/5.56!
Scout Actual is offline  
Old 11-24-2013, 09:22 AM
  #5  
Giant Nontypical
 
Join Date: Oct 2013
Posts: 9,230
Default

Muzzle energy never killed anything.How many deer you seen shot at a range of 2 ft?

What is the energy at 100 yards? The heavier bullet of the 30 cal will be higher than the energy of the 22 cal at hunting ranges. Sectional density and ballistic co-efficiency mean a lot more than muzzle energy. I've been told you need 8oo ft lbs of energy to ensure adequate penetration on deer sized game.

Additionally, few game animals differ so much in body size than whitetails do. An average buck in TX or most the Deep South will not make 200 lbs on the hoof. But a buck in ME or MN or Canada will go well over 300 lbs. While a .223 may work on the smaller deer I sure wouldn't want to take on a big Northern or Mid-Western buck with it.

I've got a fair amount of combat experience with the 5.56 and have seen what it does to flesh. It makes a bad surface wound but often doesn't get really good penetration. Remember it is a military round and you can take more guys out of action by wounding than you can by killing. Dead men can stay where they fall but wounded need to be transported and that takes additional guys.

In my opinion, the .223 is a heck of a coyote round but it isn't a deer round.

Last edited by flags; 11-25-2013 at 04:39 AM.
flags is offline  
Old 11-24-2013, 09:27 AM
  #6  
Nontypical Buck
 
Nomercy448's Avatar
 
Join Date: Oct 2009
Location: Kansas
Posts: 3,905
Default Reality Check Time...

Originally Posted by Scout Actual
...looking for information that would "disprove" my theory.
Ask and ye shall receive...

First off, getting 1800ft.lbs. out of a .223rem is a stretch. I'm not sure I've ever gotten that much, and I know my current loads don't.

Second thing:

Energy is one thing, penetration power is another.

Many people are actually confused about what generates penetration. Newton's law is about the conservation of MOMENTUM, not energy. The impact MOMENTUM of a round is much more important than the energy. Both Kinetic Energy and Momentum are inherently linked since they both depend on bullet mass and velocity, but momentum varies proportionately with both mass and velocity, whereas energy varies proportionately with mass, but EXPONENTIALLY with velocity. A little speed goes a long ways for KE, but not very far for momentum. Double Speed, you double momentum, whereas it would quadruple your KE. Momentum is what is conserved during an impact, NOT energy.

So I look at a round's Momentum, not just KE.

Another factor that is very commonly used to determine a given cartridge's stopping power is "Taylor Knock Out Factor". The TKO factor is the momentum of the round times the diameter of the bullet: bullet weight in grains x velocity in fps x bullet dia in inchest / 7000. In a nutshell, this is used to determine how hard hitting a given cartridge can be. For example, a .30-06 with 150grn bullet at 2950fps (been using this load for 15yrs) = 2898ft.lbs. KE, whereas a .45-70 shooting 325grn Hornady FTX's (my wife's preferred load) at 1790fps = KE of 2312 ft.lbs. BUT... When you compare the momentum or TKO of the two, you see why the .45-70 hits so hard: .30-06 TKO = 19.5, .45-70 TKO = 37.6!!!

So let's talk some numbers:

.30-30winchester, VERY easy to find 2200fps loads with 170grn pills.
1827ft.lbs.
16.5 TKO
53.4 ft.lbs./sec momentum

.223rem my favored coyote load is 50grn @ 3420fps
1299ft.lbs.
5.5 TKO
24.4 ft.lbs./sec momentum

Heavy .223rem load for hogs and long range play, 69grn @ 2840fps
1236ft.lbs. Kinetic Energy
6.3 TKO
28.0 ft.lbs./sec momentum

So even though they aren't that far spread in terms of energy, the .30-30 has around twice the impact momentum, and about 3x the TKO factor for stopping power.

Last edited by Nomercy448; 11-24-2013 at 09:35 AM.
Nomercy448 is offline  
Old 11-24-2013, 09:34 AM
  #7  
Nontypical Buck
 
Nomercy448's Avatar
 
Join Date: Oct 2009
Location: Kansas
Posts: 3,905
Default

Double Check your link. The Wikipedia page for the 5.56Nato has JOULES, not ft.lbs. There are no loads on that page that are 1800ft.lbs., they are 1800 JOULES, which equates to 1200-1300ft.lbs.

So yes, there is a big energy gap between the .223/5.56 at 1200-1300ft.lbs. and the .30-30win at 1800ft.lbs., and farther still between their momentum and TKO stopping power factors.

That said, yes, the .223rem will kill deer, I've knocked down several in TX with a .22-250. But no, it's not the equivalent of the .30-30, not by a long stretch.
Nomercy448 is offline  
Old 11-24-2013, 12:02 PM
  #8  
Spike
Thread Starter
 
Scout Actual's Avatar
 
Join Date: Nov 2013
Posts: 11
Default

Originally Posted by Nomercy448
Ask and ye shall receive...

First off, getting 1800ft.lbs. out of a .223rem is a stretch. I'm not sure I've ever gotten that much, and I know my current loads don't.

Second thing:

Energy is one thing, penetration power is another.

Many people are actually confused about what generates penetration. Newton's law is about the conservation of MOMENTUM, not energy. The impact MOMENTUM of a round is much more important than the energy. Both Kinetic Energy and Momentum are inherently linked since they both depend on bullet mass and velocity, but momentum varies proportionately with both mass and velocity, whereas energy varies proportionately with mass, but EXPONENTIALLY with velocity. A little speed goes a long ways for KE, but not very far for momentum. Double Speed, you double momentum, whereas it would quadruple your KE. Momentum is what is conserved during an impact, NOT energy.

So I look at a round's Momentum, not just KE.

Another factor that is very commonly used to determine a given cartridge's stopping power is "Taylor Knock Out Factor". The TKO factor is the momentum of the round times the diameter of the bullet: bullet weight in grains x velocity in fps x bullet dia in inchest / 7000. In a nutshell, this is used to determine how hard hitting a given cartridge can be. For example, a .30-06 with 150grn bullet at 2950fps (been using this load for 15yrs) = 2898ft.lbs. KE, whereas a .45-70 shooting 325grn Hornady FTX's (my wife's preferred load) at 1790fps = KE of 2312 ft.lbs. BUT... When you compare the momentum or TKO of the two, you see why the .45-70 hits so hard: .30-06 TKO = 19.5, .45-70 TKO = 37.6!!!

So let's talk some numbers:

.30-30winchester, VERY easy to find 2200fps loads with 170grn pills.
1827ft.lbs.
16.5 TKO
53.4 ft.lbs./sec momentum

.223rem my favored coyote load is 50grn @ 3420fps
1299ft.lbs.
5.5 TKO
24.4 ft.lbs./sec momentum

Heavy .223rem load for hogs and long range play, 69grn @ 2840fps
1236ft.lbs. Kinetic Energy
6.3 TKO
28.0 ft.lbs./sec momentum

So even though they aren't that far spread in terms of energy, the .30-30 has around twice the impact momentum, and about 3x the TKO factor for stopping power.
Great writeup! Very informative. I'm an engineer & I like math so I'll be reading your post another couple times to make sure I grok it all. I've got a scoped .308 Win bolt gun. I want to get a 30-30 lever gun and use it with a peep sight for shorter range & mobile work.

Originally Posted by Nomercy448
Double Check your link. The Wikipedia page for the 5.56Nato has JOULES, not ft.lbs. There are no loads on that page that are 1800ft.lbs., they are 1800 JOULES, which equates to 1200-1300ft.lbs.

So yes, there is a big energy gap between the .223/5.56 at 1200-1300ft.lbs. and the .30-30win at 1800ft.lbs., and farther still between their momentum and TKO stopping power factors.

That said, yes, the .223rem will kill deer, I've knocked down several in TX with a .22-250. But no, it's not the equivalent of the .30-30, not by a long stretch.
Thank you! You've "solved" the biggest mystery I had. Damn units! They'll get you every time. I was very surprised that 5.56 pressures would push the round so much faster than the .223 pressures but I *thought* I saw the numbers but didn't notice they swapped units on me. That makes the KE corroborate the rest of the information. If fact, if I had noticed that it was in Joules I would never have written my original post in the first place!
Scout Actual is offline  
Old 11-24-2013, 04:15 PM
  #9  
Nontypical Buck
 
Join Date: Feb 2003
Location: Eastern wv
Posts: 3,649
Default

the 223/5.56 with a good bullet will kill deer, question is can you find them once they are dead, and its not that easy trust me, chrony any 5.56 load and show me its 28% faster than a 223 or even has 28% more energy, shot in the proper firearms it may be 28% higher in pressure but they are much closer than you think.
RR
Ridge Runner is offline  
Old 11-24-2013, 09:51 PM
  #10  
Giant Nontypical
 
bigtim6656's Avatar
 
Join Date: Sep 2005
Posts: 6,867
Default

To me if u can rifle hunt want an ar why not go 7.62/308. If the. 5.56 was all i had to hunt for deer i would and did but not my first choice To me better to go bigger then what u need for a min. My hunting gun is gonna be a 308 ar im pretty sure if i hit the shoulder it will blow through with enough energy left over a 223 idk prob but to me we owe it to the deer to put it down quickly and recover it
bigtim6656 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.